[snip]
>
>
>Ai dreptate...
>Eu as vrea o solutie pt inversarea placilor de retea,
>dar sa pastrez fizic placile asa cum sunt ele
>(una dintre ele este un intel pe care il vreau in lan si
>cealalta este un shit de 10 pe care il vreau in wan)
Pai in momentul de fata ai asha:
cablu1=cablu cu externetu :)
cablu2=cablu cu localnetu
placa1=placa spre externet care e intel
placa2=placa spre localnet care e de 10Mbit
ip1 - ip-ul de pe placa de retea spre externet
ip2 - ip-ul de pe placa de retea spre localnet
Solutia 1 - ce mai nasoala dar si cea mai sigura.
OK.
Pasi:
1. sed s/eth0/eth1 /etc/sysconfig/network-scripts/ifcfg-eth0 >/tmp/eth1
2. sed s/eth1/eth0 /etc/sysconfig/network-scripts/ifcfg-eth1 >/tmp/eth0
3. rm -rf /etc/sysconfig/network-scripts/ifcfg-eth0
4. rm -rf /etc/sysconfig/network-scripts/ifcfg-eth1
5. mv /tmp/eth0 /etc/sysconfig/network-scripts/ifcfg-eth0
6. mv /tmp/eth1 /etc/sysconfig/network-scripts/ifcfg-eth1
7. sed s/eth0/eth1 /etc/sysconfig/network >/tmp/gw
8. rm -rf /etc/sysconfig/network
9. mv /tmp/gw /etc/sysconfig/network
10. Schimbi cablurile de retea intre ele.
11. /etc/init.d/network restart;/etc/init.d/network restart
Done.
Solutia 2:
solutie adoptata in cazul in care ai driverele pt placile de retea built
in folosesti solutia 1 :)
1. ai asa in /etc/modules.conf
alias eth0 modul_placa1
alias eth1 modul_placa2
2. vi /etc/modules.conf
si schimbi in:
alias eth0 modul_placa2
alias eth0 modul_placa1
schimbi cablurile.
/etc/init.d/network stop
rmmod modul_placa1
rmmod modul_placa2
/etc/sysconfig/network start
sanatate la gaini.
Mai mura in gura decat atat nu cred ca se poate da.
--
Numai bine,
Ionut.
Murgoci Ionut
Network & System Engineer
RDS Iasi - Network Operations Center
Phone: +40-32-218385 Fax: +40-32-225132 Mobile: +40-094-794620
---
Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
unsubscribe from this list.
