On Sat, 20 Oct 2001 19:26:38 +0300
Silviu Marin-Caea <[EMAIL PROTECTED]> wrote:
Scuze pentru orfanii aia urati dinainte
###########################################################################
README
###########################################################################
Red Hat Linux/x86 7.2 (Enigma)
====================================
The contents of this CD-ROM are Copyright (C) 1995-2001 Red Hat, Inc. and
others. Please see the individual copyright notices in each source package
for distribution terms. The distribution terms of the tools copyrighted by
Red Hat, Inc. are as noted in the file COPYING.
Red Hat and RPM are trademarks of Red Hat, Inc.
============================================================================
DIRECTORY ORGANIZATION
Red Hat Linux is delivered on four CDROMs (disc 1 through disc 4). Disc 1
can be directly booted into the installation on most modern systems, and
contains the following directory structure:
/mnt/redhat
|----> RedHat
| |----> RPMS -- binary packages
| `----> base -- information on this release of Red Hat
| Linux used by the installation process
|----> images -- boot and ramdisk images
|----> dosutils -- installation utilities for DOS
|----> COPYING -- copyright information
|----> README -- this file
|----> RELEASE-NOTES -- the latest information about this release
| of Red Hat Linux
`----> RPM-GPG-KEY -- GPG signature for packages from Red Hat
Disc 2 is similar (only the RedHat subdirectory is present).
The directory layout of discs 3 and 4 is similar to the following:
/mnt/redhat
|----> SRPMS -- source packages
|----> preview -- alpha and beta level packages (source
| and binary) for the adventurous user (may
| not be present in every release)
|----> COPYING -- copyright information
`----> RPM-GPG-KEY -- GPG signature for packages from Red Hat
If you are setting up an image for NFS, FTP, or HTTP installations, you
need to get everything from the RedHat directory from both disc 1 and
disc2. On Linux and Unix systems, the following process will properly
configure the /target/directory on your server.
1) Insert disc 1
2) mount /mnt/cdrom
3) cp -a /mnt/cdrom/RedHat /target/directory
4) umount /mnt/cdrom
5) Replace disc 1 with disc 2
6) mount /mnt/cdrom
7) cp -a /mnt/cdrom/RedHat /target/directory
8) umount /mnt/cdrom
============================================================================
INSTALLING
There are different boot images for booting your system; you will need one
of them to boot your system into the Red Hat installation and upgrade
program. For CDROM and hard drive installs, use the boot.img file. NFS,
FTP, and HTTP installations requires the bootnet.img image. Installs
through PCMCIA adapters (such as for PCMCIA-based CDROMs or network
cards) need the pcmcia.img file. These image files may be found in
the images directory on disc1.
Many systems will require additional device drivers that are not available
on the boot floppy. The images directory contains a drivers.img file which
contains many extra drivers. Put its contents onto a floppy before
beginning the installation process, and follow the on-screen instructions.
To make a floppy disk from any of these images, use either the rawrite
program in the dosutils directory or 'dd' under any Linux-like system.
These programs will transfer the image to physical floppies. Once the
floppy has been created, insert the boot floppy and boot your machine.
Many computers can now automatically boot from CDROMs. If you have such a
machine (and it is properly configured) you can boot the Red Hat Linux
CDROM directly without using any boot disks. After booting, you'll be able
to install your system from the CDROM. Note that booting from a CDROM is
equivalent to booting the boot.img file; additional drivers may still be
required.
============================================================================
GETTING HELP
For those that have web access, see http://www.redhat.com. In particular,
access to our mailing lists can be found at:
http://www.redhat.com/mailing-lists
If you don't have web access you can still subscribe to the main mailing
list.
To subscribe, send mail to [EMAIL PROTECTED] with
subscribe
in the subject line. You can leave the body empty.
###########################################################################
RELEASE-NOTES
###########################################################################
Red Hat Linux/x86 7.2 Release Notes
---------------------------------------------
Anaconda/Installer Notes
------------------------
Bootloader
----------
- We now use GRUB as the default boot loader. However, LILO is still
available for legacy installations.
- GRUB supports a password that controls access to the GRUB shell;
because of GRUB's ability to run arbitrary commands, this can be an
important aspect in maintaining system security. Please
carefully consider the implications of this before deciding
whether or not to set a GRUB password. This password is
encrypted using MD5; see the grub-md5-crypt man page for more
information.
- When performing an upgrade from a previous version of Red Hat Linux,
it is necessary to write the boot loader out to the same location
that was used in the previous installation. For example, if the
boot loader was written to the master boot record (MBR) originally,
when the system is upgraded you must write the boot loader to
the MBR as well. Otherwise, the system will most likely not be
able to boot.
- If you are using the GRUB boot loader, please note that you do not
have to re-run GRUB after upgrading your kernel. This is different
from the LILO boot loader, which required re-running LILO after each
change. Simply modifying GRUB's configuration file
(/boot/grub/grub.conf) to point to your new kernel will allow GRUB to
boot it.
- If you decide to switch to using the GRUB boot loader after
installation, or you need to reinstall GRUB, you may do so using the
/sbin/grub-install command. The command syntax must include the
device specification showing where the boot loader should be
installed.
Example:
/sbin/grub-install /dev/hda
- To boot into single-user mode from GRUB, do the following from
the GRUB menu screen:
1. Select the desired kernel.
2. Press the 'e' key to edit that entry.
3. Use the arrow keys to navigate to the kernel line
(for example: kernel /vmlinuz-2.4.7-1 ro root=/dev/hda2)
4. Press the 'e' key to edit the line.
5. Add the argument 'single' to the end of the line and
press return.
6. Press the 'b' key to boot.
Partitioning
------------
- The Disk Druid user interface has been redesigned to incorporate an
interface that takes better advantage of a graphical environment.
- Disk Druid can now create primary partitions by specifying a cylinder
range.
- Disk Druid now supports the ability to specify that a new partition
must be created as a primary partition.
- Text mode installations now have support for creating RAID devices.
- Specifying spare drives for RAID devices is now supported.
- Autopartitioning now allows you to specify which drives to use, and
which to avoid touching at all.
- There is now an option to view and edit the results of
autopartitioning (for graphical installations only -- under text mode
you will always see the results).
- The ext3 journaling filesystem is now available.
- Pre-existing filesystems may be selected for reformatting during the
installation.
- Pre-existing ext2 filesystems may be migrated to ext3 during installs
and upgrades. This process does not affect the data on the filesystem.
- Many additional sanity checks are made against user-created mount
points; this should avoid most common problems (such as a '/' mount
point of only 5 MB).
- GNU Parted is now used as the partitioning backend, replacing the
libfdisk library.
Parted determines the filesystem type by examining the actual
filesystem written onto a partition, instead of relying on the
filesystem type written in the partition table. This can lead to
confusing situations when there are preexisting partitions.
For example, if you use fdisk to change the partition type of a VFAT
partition to ext2, parted will still see this as a VFAT partition
because there is still a VFAT filesystem on it. In this example, you
must explicitly reformat the partition as ext2 via the Disk Druid
interface before the partition will be treated as ext2. Anytime you
use fdisk inside the installer, and then proceed to the Disk Druid
screen to set mount points, you should also review and edit each
partition (in Disk Druid) and appropriately set its format options.
Kickstart
---------
- During the installation process, a kickstart file reflecting the
user-selected installation options is written to
/root/anaconda-ks.cfg. This file can be used to create a installation
similar to the newly-installed system.
- Kickstart runs in graphical mode (when this mode is available.
However, it can be switched back to text mode by using the 'text'
directive in the kickstart file
- Kickstart Configurator (ksconfig) now supports creating partitions on
a specific drive and an existing drive, configuring X, writing
pre-installation and post-installation scripts, performing an upgrade,
and the new kickstart features present in this release. It also
allows users to preview their choices before saving the file, and has
an integrated manual to assist in easy kickstart file creation.
- Kickstart has several new features/directives:
interactive -- reads in kickstart file, goes through install with UI
filled in with kickstart values. It will wait for user
input at each screen.
text -- forces kickstart to run in text mode. The default is now to
run in graphical mode.
- The clearpart directive now accepts a --ondisk option:
--ondisk -- you can specify which drives to create partitions on now.
- A new command for bootloader, 'bootloader' which supports the
following:
--append <args> -- append <args> on the kernel line
--useLilo -- use LILO instead of GRUB
--md5pass <crypted MD5 password> -- password for GRUB to use
- Added flags for xconfig directive to define:
--resolution 1024x768 -- set screen resolution (1024 by 768 in this
example)
--depth 16 -- set display color depth (set to 16-bit color in this
example)
Miscellaneous
-------------
- The drivers.img driver disk image has been split into multiple disk
images. For more information, please read the README file in the
images/ directory on CD #1 (or in the install tree you are using for
network installs).
- The individual package selection screen now supports a flat view of
all packages.
- For FTP-based installations, it is now possible to loopback mount the
Red Hat Linux ISO images on an FTP server. The ISO images should be
loopback mounted as /disc1, /disc2, and so on -- in the same
directory. This directory should be then be specified when an
FTP-based installation is started.
- In order to maximize space in the install image, the BusyBox program
now provides support for many commonly-used commands.
- Rescue mode now prompts before attempting to mount filesystems from
the installed system.
- Partitionless installations are no longer supported; however, upgrades
to previous partitionless installations are still supported.
- USB floppy devices are now supported during installation.
Distribution General Notes
--------------------------
- There are known issues upgrading Red Hat Linux 6.x, 7.0, and 7.1
systems running Ximian GNOME.
The issue is caused by version overlap between the official Red Hat
Linux RPMs and the Ximian RPMs. Please be aware that this is a
configuration unsupported by Red Hat. You have several choices in
resolving this issue:
- You may remove Ximian GNOME from your Red Hat Linux system prior to
upgrading Red Hat Linux.
- You may upgrade Red Hat Linux, and then immediately reinstall Ximian
GNOME.
- You may upgrade Red Hat Linux, and then immediately remove all
remaining Ximian RPMs, and replace them with the corresponding Red
Hat Linux RPMs.
You *must* resolve the version overlap using one of the above choices.
Failure to do so will result in an unstable GNOME configuration.
- GNOME has been updated to 1.4 and includes the Nautilus graphical
shell.
- The GNOME control center has been replaced by the 'preferences:'
folder in Nautilus. Running 'gnomecc' manually should still work.
- The PowerTools CD is no longer being produced. However, the most
widely-used packages which were in PowerTools have been included in
Red Hat Linux.
- Firewall Configuration -- For added security, you can configure a
firewall as part of your system installation. You can choose from two
levels of security, as well as choosing which common system services
should be allowed or disallowed by default.
Please note that both 'medium' and 'high' firewall settings will cause
RPC-based services (such as NIS or NFS) to be blocked, and thus fail.
- XFree86 updated to 4.1.0, and includes improved hardware support. 3D
hardware acceleration for the ATI Radeon is now included. Most video
drivers now support the RENDER extension, providing anti-aliased font
support to a wider range of hardware. The old XIE and PEX (Phigs) X
extensions are now officially deprecated by the XFree86 team, and will
be removed from a future release of Red Hat Linux.
- XFree86 3.3.6 is now deprecated and will be removed from a future
release of Red Hat Linux. It is currently included for compatibility.
- The initscripts now use /sbin/ip (from the iproute packages) for most
operations. /sbin/ip requires the netlink and netlink routing features
of the kernel to function properly; it is impossible to make use of
the kernel's full routing functionality without these features. If you
are building your own kernel, make sure that CONFIG_NETLINK and
CONFIG_RTNETLINK are enabled.
- Initial unified support for Korean has been added.
- Binutils and gcc now support merging string constant duplicates across
whole binaries or shared libraries (previously duplicates have been
merged within a single compilation unit only).
- gcc-3.0 is included for those who need standards-compliant C++ or STL
support, and for those who want to use the Java features of gcc. Note
that the supported system compiler for C and C++ is still gcc-2.96
(Red Hat).
- The VNC package now supports a new encoding type for low-bandwidth
connections.
- Red Hat Linux now includes the first release of the Gnome XSLT
processor (xsltproc) using version 2 of the associated XML library.
- ODBC-support has been added to php, postgresql have been updated to
7.1.2, python interfaces have been added, and perl interfaces
updated.
- Several new configuration tools are included. With these tools you can
configure:
- network (redhat-config-network)
- time/date (redhat-config-date)
- system control (redhat-config-services)
- users/groups (redhat-config-users)
- The following packages/features are deprecated, and may be removed
in a future Red Hat Linux release:
- Netscape 4.x
- Qt 1.x
- KDE v1 compatibility libraries/build environment
- Red Hat Linux 6.x build environment
- Enlightenment window manager
- linuxconf
- ncpfs
- mars_nwe
- XFree86 3.3.x
- kaffe
Kernel Notes
------------
- The kernel now includes the ext3 journalling filesystem. This
filesystem has 3 modes of operation:
- 'ordered'
- 'journal'
- 'writeback'
The default is 'ordered', which will make sure that after a crash you
should always see valid data in recently-written files.
The 'writeback' mode can be faster in some cases, but it does not
force data to disk so rigorously; therefore, after a crash you may see
corruption in recently-written files.
The 'journal' mode copies all data to the journal, and can result in
great speed boosts if you are performing lots of synchronous data
writes (for example, on mail spools or synchronous NFS servers).
However, in normal use 'journal' mode is usually significantly slower.
The mode is set by using the 'data=<mode>' mount option in /etc/fstab
or as 'mount -o data=<mode>' on the mount command line.
Normally, an ext2 filesystem is checked automatically once either a
certain period of time or a given number of mounts have passed since
the filesystem was last checked. At these times, a full 'fsck' (file
system check) of the filesystem will be forced at system boot time in
order to check the integrity of the filesystem.
When the installer creates an ext3 filesystem or upgrades an ext2
filesystem to ext3, it disables these automatic checks. Use 'tune2fs'
with the '-c' and/or '-i' options to re-enable them, or to disable
them on ext3 filesystems that you create manually.
Note that these cleanup fsck scans have nothing to do with the
filesystem's behavior when an error is discovered on disk, or when
a crash occurs. If a filesystem consistency error is found on
disk, then on subsequent reboot a fsck will always be forced, both
for ext2 and ext3 filesystems. If a crash occurs on an otherwise
intact filesystem, ext2 will always force a fsck, and ext3 will
always perform its filesystem recovery step; these cleanups are not
affected by the 'tune2fs' forced-check interval settings.
Please keep in mind that even a journaling file system can be damaged
by power loss. When a system loses power, that system's behavior is
undefined. For example, memory contents can decay (become randomly
corrupt) as the contents are copied to a hard drive running on the
last bit of power. This is a fundamentally different situation from
the more defined sequence of events caused by pressing the system's
"reset" button while the system is running. In addition, IDE hard
drives do not provide all of the write order guarantees that SCSI
drives do.
Therefore, after a system crash, you will be offered a chance to
choose to check the integrity of your filesystems. The file
/.autofsck is the "crash flag" used to provide this functionality.
You will be given five seconds to type "y" to check your filesystems
during a boot after your system has crashed for any reason.
- Red Hat Linux will install a kernel optimized for Athlon processors on
systems with an Athlon-class CPU. Due to the optimization, this will
put a greater load on the system components. Therefore, a very small
number of machines may fail to boot as a result of the hardware not
strictly conforming with AMD's specifications and thus being unable to
cope with the load. On such systems, you can either upgrade the
hardware (under-powered power supply units can cause this) or use the
rescue capability of the installer to install an i686 kernel.
- Some Athlon-class machines are out-of-spec or have overly aggressive
chipset configurations set by their BIOS. On these systems, you
may see random "Oops" messages at boot time (after successfully
completing the install process) and will be unable to boot successfully.
On these systems, boot with the "noathlon" option to turn off the
athlon optimizations; install the 686 kernel instead of the athlon
kernel to avoid this for the future.
Printing Notes
--------------
- The printconf system now provides a printconf-tui program, for text-mode
printer configuration.
- The printconf-tui program provides command line import and export
capabilities. The import can merge printer definitions with those that
are already present, or it can override them (the default).
Example:
printconf-tui --Xexport > settings.xml
printconf-tui --Ximport < settings.xml
or:
printconf-tui --Ximport --merge < settings.xml
Combined with redirection -- such as bash's 'here documents' (see the
bash man page for more information) -- it is now easy to put printer
setups into kickstart files.
- The printconf-tui program can clear settings completely.
Example:
printconf-tui --Xclear
- The printconf tools now provide limited printer auto-detection.
- redhat-config-printer-tui and redhat-config-printer-gui alias
printconf-tui and printconf-gui, respectively.
- Ghostscript has been updated to 6.51, and supports many additional
drivers, as well as encrypted PDF files.
- Support has been added for Hewlett Packard's hpijs ghostscript
print drivers. Though they are not shipped with the distribution,
due to license restrictions, they can be downloaded from the project
site at: http://hpinkjet.sourceforge.net, and should work as drop-in
components.
i386 7.2
--
Silviu Marin-Caea - Network & Systems Administrator - Delta Romania
Phone +4093-267961
---
Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
unsubscribe from this list.
