rpetre wrote:
> get wdl.lug.ro/linux/netdiag*.rpm ...... check
> rpm -Uvh netdiag[tab] ................... check
> /sbin/mii-diag ......................... check
>
> cica speed fixed la 10Mbps half duplex, in rest totul OK :)
>
> spuneti-mi, ce i-am facut de l-am fixat?
>
optiunea A:
[root@mail /root]# ./mii-diag --help
Usage: mii-diag [-aDfrRvVw] [-AF <to-advertise>] [--watch] <interface>.
MII diagnostic basic options
Adapters with MII transceivers (all recent adapters running at 100Mbps)
support the following options:
-A link-type
Set the link capabilities we advertise using
autonegotiation. Valid values are 100baseT4, 100baseTx, 100baseTx-FD,
100baseTx-HD,
10baseT, 10baseT-FD, and 10baseT-HD. The abbreviations HD
and FD stand for full-duplex and half-duplex. The 100baseTx and
10baseT settings advertise both duplex values.
If more detailed control is required, the exact register
setting may be specified with as a hexadecimal number e.g. 01e0.
-F link-type
Force the transceiver to the fixed link-type.
Autonegotiation is implicitly disabled.
optiunea B:
wolfy@wolfy> ~>mii-tool --help
usage: mii-tool [-VvRrwl] [-A media,... | -F media] [interface ...]
-V, --version display version information
-v, --verbose more verbose output
-R, --reset reset MII to poweron state
-r, --restart restart autonegotiation
-w, --watch monitor for link status changes
-l, --log with -w, write events to syslog
-A, --advertise=media,... advertise only specified media
-F, --force=media force specified media technology
media: 100baseT4, 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD,
(to advertise both HD and FD) 100baseTx, 10baseT
wolfy@wolfy> ~>which mii-tool
/sbin/mii-tool
wolfy@wolfy> ~>rpm -qf /sbin/mii-tool
net-tools-1.60-3
---
Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
unsubscribe from this list.
