Am rugamintea daca cineva dintre voi are un scanner hp 2200c pus pe linux
sa imi spuna si mie ce configurari a facut.
Eu cam atit am facut :
[ 1048,tty1,0.75 root ]# cat hp.conf
/dev/usbscanner
option connect-device
[ 1049,tty1,0.75 root ]# ls /dev/usbscanner*
lrwxrwxrwx 1 root root 16 Dec 5 15:50 /dev/usbscanner ->
/dev/usbscanner0
crw-r--r-- 1 root root 180, 48 Dec 5 17:37 /dev/usbscanner0
crw-r--r-- 1 root root 180, 49 Dec 5 17:49 /dev/usbscanner1
[ 1052,tty1,0.75 root ]# cat /etc/modules.conf | grep scanner
#scanner
options scanner vendor=0x3f0 product=0x605
dar dupa un xsane care spune ca nu gaseste nimic iar daca dau un
[ 1053,tty1,0.75 root ]# lsmod | grep scanner
scanner 8480 21
usbcore 52864 1 [scanner usb-uhci]
imi inebuneste modulul.
Se poate face ceva ?
--
Regards: Mihai Ichim
_ _
// Mihai Ichim <[EMAIL PROTECTED]> /> ELECTRON M.BIT \\
// Network & System Administrator // http://www.embit.ro //
\> http://mihai.embit.ro </ Email: [EMAIL PROTECTED] </
---
Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
unsubscribe from this list.
