Salut ,
am incercat si cu xinit ... ramin doar cu deschiderea
..E2-E4!! ; cam asa arata acel typescript :
Script started on Thu Dec 20 01:17:20 2001
root@darkstar:/usr/X11/bin# startx
(--) PCI:*(1:0:0) ATI Mach64 GD rev 92, Mem @
0xfd000000/24, 0xfcfff000/12, I/O @ 0xec00/8
..................
(II) ATI: ATI driver (version 6.3.6) for chipsets:
ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage
128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI
Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE
(PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility
MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI
Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon
QG (AGP),
ATI Radeon VE (AGP)
(II) Loading
/usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 6.3.6
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 16, (--) framebuffer bpp 16
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(EE) ATI(0): unknown reason for exception
(EE) ATI(0): cannot continue
(--) ATI(0): ATI 3D Rage Pro graphics controller
detected.
(--) ATI(0): Chip type 4744 "GD", version 4, foundry
UMC, class 0, revision 0x01.
(--) ATI(0): AGP bus interface detected; block I/O
base is 0xEC00.
(--) ATI(0): ATI Mach64 adapter detected.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 565
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(II) ATI(0): Storing hardware cursor image at
0xFD1FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xFD000000.
(!!) ATI(0): Virtual resolutions will be limited to
2047 kB
due to linear aperture size and/or placement of
hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at
0xFCFFF400.
(II) ATI(0): Using Block 1 MMIO aperture at
0xFCFFF000.
(==) ATI(0): Write-combining range
(0xfd000000,0x200000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 2048 kB of SGRAM (1:1) detected (using
2047 kB).
(WW) ATI(0): Cannot shadow an accelerated frame
buffer.
(--) ATI(0): Internal programmable clock generator
detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(0): My Monitor: Using hsync range of
31.50-37.90 kHz
(II) ATI(0): My Monitor: Using vrefresh range of
50.00-90.00 Hz
(II) ATI(0): Maximum clock: 230.00 MHz
(II) ATI(0): Not using default mode "640x480" (hsync
out of range)
(II) ATI(0): Not using default mode "800x600" (hsync
out of range)
(II) ATI(0): Not using default mode "800x600" (hsync
out of range)
(II) ATI(0): Not using default mode "800x600" (hsync
out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync
out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync
out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync
out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync
out of range)
(II) ATI(0): Not using default mode "1152x864" (hsync
out of range)
(II) ATI(0): Not using default mode "1280x960"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1280x960"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1280x1024"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1280x1024"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1280x1024"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1600x1200"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1600x1200"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1600x1200"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1600x1200"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1600x1200"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1792x1344"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1792x1344"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1856x1392"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1856x1392"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1920x1440"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1920x1440"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1400x1050"
(insufficient memory for mode)
(II) ATI(0): Not using default mode "1400x1050"
(insufficient memory for mode)
(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
(**) ATI(0): Default mode "1024x768": 44.9 MHz, 35.5
kHz, 87.1 Hz (I)
(**) ATI(0): Default mode "800x600": 40.0 MHz, 37.9
kHz, 60.3 Hz
(**) ATI(0): Default mode "640x480": 31.5 MHz, 37.5
kHz, 75.0 Hz
(==) ATI(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(==) ATI(0): Write-combining range
(0xfd000000,0x200000)
(II) ATI(0): Using XFree86 Acceleration Architecture
(XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
8 128x128 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(**) Mouse1: Protocol: "PS/2"
(**) Mouse1: Core Pointer
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1"
(type: MOUSE)
X connection to :0.0 broken (explicit kill or server
shutdown).
xinit: connection to X server lost.
waiting for X server to shut down
root@darkstar:/usr/X11/bin# exit
exit
Script done on Thu Dec 20 01:17:42 2001
--- Mihai RUSU <[EMAIL PROTECTED]> wrote:
> cumva ai incercat startx ?
> incearca cu xinit si vezi daca iti apare un terminal
> sau fa-ti un .xinitrc in contul tau in care scrii
> xterm & si apoi incearca
> cu xinit
>
> PS: eu banuiesc ca X-ul deja iti merge (ecranul gri!
> de fapt e ca o tabla
> de sah la rezolutie mare) dar ca nu iti lanseaza
> nici un manager de
> ferestre
>
> ----------------------------
> Mihai RUSU
> "... and what if this is as good as it gets ?"
>
> ---
> Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe
> rlug' to
> unsubscribe from this list.
>
__________________________________________________
Do You Yahoo!?
Check out Yahoo! Shopping and Yahoo! Auctions for all of
your unique holiday gifts! Buy at http://shopping.yahoo.com
or bid at http://auctions.yahoo.com
---
Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
unsubscribe from this list.
