Daca ma intrebi pe mine, am kernel 2.4.18+resier+ext3+quota+i2c+ac3
patches + htb2.4.17 patch
In rest sunt: iproute-2.2.14-14 (de pe RH7.1) cu htb2_tc.diff
Iulian
On D, 2002-05-19 at 17:15, Ciprian Niculescu wrote:
ca statistica: ce kernel, ver htb, distributie linux, daca mai ai alte
patchuri
ca eu am doua masini si pe una merge si pe una nu, si nenea devik nici
el nu stie de ce
C
Iulian Mihaescu wrote:
> GATA! Am rezolvat!
>
> HTB-ul is the best! Asa este cum mi s-a spus. Mai usor decit CBQ-ul,
> mult mai simplu de configurat, mai clar si bine documentat. Cel putzin
> pentru un newbie ca mine a fost solutia miraculoasa care a rezolvat
> problema.
>
> Multumesc tuturor celor care mi-au scris pentru bunavointa de care au
> dat dovada, si nu in ultimul rind pentru "nervii tari" pe care iatzi
> avut suportind insistenta mea, care a reusit in final sa ma enerveze
> chiar si pe mine ........:-)))))
>
> Acum totul merge asa cum doream eu....
>
> Traiasca HTB-ul si comunitatea Linux din Romania!
>
> Hi, hi, hi....:-), am rezolvat, am rezolvat, am rezolvat......
>
> Iulian
>
>
> On V, 2002-05-17 at 15:59, Ciprian Niculescu wrote:
> Gushterul wrote:
>
> > Bounded si isolated pentru 1:16 nu pentru 1: ca asha ramai dreq pe afara
> > si putin probabil sa iti mearga internetul dupa aia:)
>
> 1:16 e bounded, si isolated de ce???
>
> si oricum a pus 1:16 tbf, care e din principiu bounded
>
> ...
>
> C
>
>
> >
> > Gushterul
> >
> > On 17 May 2002,
> > Iulian Mihaescu wrote:
> >
> >
> >>Hello Gushterul,
> >>
> >>Am sa ma conformez. Se pare ca nu am nici o sansa sa-l vad mergind.
> >>
> >>Daca itzi spun ceva mesajele aceste da-mi un reply te rog. Oricum am
> >>inteles de pe lista ca pentru conexiuni pasive pe FTP, nu prea este de
> >>configurat cu CBQ.
> >>
> >>In primul caz, cel cu limitare pe TOT LANUL PE ORICE SERVICIU:
> >>
> >># tc -s class ls dev eth0
> >>class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit
> >> Sent 76710 bytes 91 pkts (dropped 0, overlimits 0)
> >> borrowed 0 overactions 0 avgidle 624 undertime 0
> >>class cbq 1:16 parent 1: leaf 16: rate 16Kbit (bounded) prio 5
> >> Sent 76626 bytes 89 pkts (dropped 9, overlimits 0)
> >> backlog 1p
> >> borrowed 0 overactions 0 avgidle 796779 undertime 0
> >>
> >># tc -s qdisc ls dev eth0
> >>
> >>qdisc tbf 16: rate 16Kbit burst 2Kb lat 610.4ms
> >> Sent 114476 bytes 114 pkts (dropped 12, overlimits 156)
> >> backlog 1514b 1p
> >>
> >>qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit
> >> Sent 114560 bytes 116 pkts (dropped 12, overlimits 117)
> >> backlog 1p
> >> borrowed 0 overactions 0 avgidle 624 undertime 0
> >>
> >>In Cazul al doilea, cu limitare pe FTP pentru LAN:
> >>
> >># tc -s class ls dev eth0
> >>class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit
> >> Sent 171388 bytes 163 pkts (dropped 0, overlimits 0)
> >> borrowed 0 overactions 0 avgidle 624 undertime 0
> >>class cbq 1:16 parent 1: leaf 16: rate 16Kbit (bounded) prio 5
> >> Sent 3797 bytes 41 pkts (dropped 0, overlimits 0)
> >> borrowed 0 overactions 0 avgidle 6.01949e+06 undertime 0
> >>
> >># tc -s qdisc ls dev eth0
> >>qdisc tbf 16: rate 16Kbit burst 2Kb lat 610.4ms
> >> Sent 3797 bytes 41 pkts (dropped 0, overlimits 0)
> >>
> >> qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit
> >> Sent 151706 bytes 150 pkts (dropped 0, overlimits 0)
> >> borrowed 0 overactions 0 avgidle 624 undertime 0
> >>
> >>Mersi oricum pentru sprijin,
> >>Iulian
> >>
> >>On V, 2002-05-17 at 22:54, Gushterul wrote:
> >> Hello Iulian,
> >>
> >> Mai bine dadeai raspunsul la tc -s qdisc ls dev eth0 shi la tc -s
> >> class dev eth0.
> >> Si mai rtfm pana le intelegi chiar daca e greu;)
> >>
> >> Gushterul
> >>
> >> Friday, May 17, 2002, 2:42:50 AM, you wrote:
> >>
> >> IM> Hello Gushterul,
> >>
> >> IM> Mersi pentru sugestii dar tot nu functioneaza. Iar acum ca sa
> >> IM> simplificam...Am facut un experiment de 2 bani si ce sa vezi: cind
> >> IM> lucreaza corect, cind NU:
> >> IM> Am eliminat restrictia pe FTP, si am aplicat restritie pentru tot
LAN-ul, indifernet de serviciu.
> >>
> >> IM> cat /etc/sysconfig/cbq/cbq-16.eth0-lan-out
> >>
> >> IM> DEVICE=eth0,10Mbit,1Mbit
> >> IM> RATE=16Kbit
> >> IM> WEIGHT=1Kbit
> >> IM> PRIO=5
> >> IM> RULE=192.168.0.0/24
> >> IM> ISLOLATED=yes
> >> IM> BUFFER=2Kb/8
> >> IM> LIMIT=3Kb
> >> IM> MTU=0
> >>
> >>
> >> IM> In aceste conditii, downloadul pe FTP se limiteaza frumusel la
2KB/s
> >>
> >> IM> Iata ce spune tc-ul in acest caz:
> >>
> >> IM> # tc qdisc ls dev eth0
> >> IM> qdisc tbf 16: rate 16Kbit burst 2Kb lat 610.4ms
> >> IM> qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit
> >>
> >> IM> # tc filter ls dev eth0
> >> IM> filter parent 1: protocol ip pref 100 u32
> >> IM> filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1
> >> IM> filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048
key ht 800 bkt 0 flowid 1:16
> >> IM> match c0a80000/ffffff00 at 16
> >>
> >> IM> # tc class ls dev eth0
> >> IM> class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit
> >> IM> class cbq 1:16 parent 1: leaf 16: rate 16Kbit (bounded) prio 5
> >>
> >>
> >> IM> Daca schimb RULE si vreu NUMAI pe FTP se duce in pusca mea... tot
in 4KB/s
> >>
> >> IM> cat /etc/sysconfig/cbq/cbq-16.eth0-lan-out
> >>
> >> IM> DEVICE=eth0,10Mbit,1Mbit
> >> IM> RATE=16Kbit
> >> IM> WEIGHT=1Kbit
> >> IM> PRIO=5
> >> IM> RULE=:21,192.168.0.0/24
> >> IM> RULE=:20,192.168.0.0/24
> >> IM> ISLOLATED=yes
> >> IM> BUFFER=2Kb/8
> >> IM> LIMIT=3Kb
> >> IM> MTU=0
> >>
> >> IM> Iata ce spune tc-ul din nou in acest caz:
> >>
> >> IM> # tc qdisc ls dev eth0
> >> IM> qdisc tbf 16: rate 16Kbit burst 2Kb lat 610.4ms
> >> IM> qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit
> >>
> >> IM> # tc filter ls dev eth0
> >> IM> filter parent 1: protocol ip pref 100 u32
> >> IM> filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1
> >> IM> filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048
key ht 800 bkt 0 flowid 1:16
> >> IM> match 00150000/ffff0000 at 20
> >> IM> match c0a80000/ffffff00 at 16
> >> IM> filter parent 1: protocol ip pref 100 u32 fh 800::801 order 2049
key ht 800 bkt 0 flowid 1:16
> >> IM> match 00140000/ffff0000 at 20
> >> IM> match c0a80000/ffffff00 at 16
> >>
> >> IM> # tc class ls dev eth0
> >> IM> class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit
> >> IM> class cbq 1:16 parent 1: leaf 16: rate 16Kbit (bounded) prio 5
> >> IM> Cam asta se intimpla. DE CE NU MERGE NUMAI PE FTP NU MAI PRICEP!
> >>
> >> IM> Iulian
> >>
> >>
> >> IM> On V, 2002-05-17 at 10:27, Gushterul wrote:
> >> IM> Hello Victor,
> >>
> >> IM> Presupun ca a fost ce am zis si ati stiut sa dati un tc qdisc
ls dev
> >> IM> eth0, tc filter ls dev eth0 etc sa vedeti pe unde o iau
packetzii. sau
> >> IM> tc -s qdisc ls dev eth0, filter, class etc...
> >>
> >> IM> Gushterul
> >>
> >> IM> Thursday, May 16, 2002, 1:42:16 PM, you wrote:
> >>
> >> IM> VBC> Nice reply Mr. Green Crawler :-)
> >>
> >> IM> VBC> Acu lasand shtoul' la o parte... L-au cam lasat nervii pe
Iulian
> >> IM> VBC> (intzelege-l shi tu! Poate are omu un dead-line imputzit
shi trebe sa se
> >> IM> VBC> tzie de el!) Si eu mi-s cam newbie la CBQ iar
documentatzia e putzintica shi
> >> IM> VBC> cam imputzita!
> >> IM> VBC> Acum e vobra ca daca tot nu e sa ai rabdare pana unu ca
tine da reply la
> >> IM> VBC> 23:30 la probleme "arzatoare" de CBQ :-)
> >>
> >> IM> VBC> Oricum,
> >> IM> VBC> Merci de reply (pt amandoi!)
> >>
> >> IM> >> Hello Iulian,
> >> IM> >>
> >> IM> >> Chiar daca mi-ai sarit la gat in mailu' anterior...
> >> IM> >> Pune isolated la class, scoate mtu 1500 de pe peste tot,
pune buffer
> >> IM> >> 2Kb/8, limit 3000, SI MAI ALES vezi sa nu ai placa de retea
in full
> >> IM> >> duplex. Conteaza datele care i le dai despre eth0 pentru ca
in functie
> >> IM> >> de alea calculeaza restul. Ma rog astea scriau shi in
manual:)
> >> IM> >>
> >> IM> >> Gushterul
> >>
> >> IM> --
> >> IM> Best regards,
> >> IM> Gushterul
mailto:[EMAIL PROTECTED]
> >>
> >> IM> ---
> >> IM> Pentru dezabonare, trimiteti mail la
> >> IM> [EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
> >> IM> REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> IM> ---
> >> IM> Pentru dezabonare, trimiteti mail la
> >> IM> [EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
> >> IM> REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
> >>
> >>
> >>
> >> --
> >> Best regards,
> >> Gushterul mailto:[EMAIL PROTECTED]
> >>
> >> ---
> >> Pentru dezabonare, trimiteti mail la
> >> [EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
> >> REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>---
> >>Pentru dezabonare, trimiteti mail la
> >>[EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
> >>REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
> >>
> >>
> >>
> >
> > ---
> > Pentru dezabonare, trimiteti mail la
> > [EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
> > REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
> >
> >
>
>
>
> ---
> Pentru dezabonare, trimiteti mail la
> [EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
> REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
>
>
>
>
>
>
>
> ---
> Pentru dezabonare, trimiteti mail la
> [EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
> REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
>
>
---
Pentru dezabonare, trimiteti mail la
[EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
---
Pentru dezabonare, trimiteti mail la
[EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
