De ceva vreme ma tot chinui sa imprim duplex pe o imprimanta hp990cxi, si
nu reusesc.
Am instalat hpijs si am configurat imprimanta cu apsfilterconfig.
Asta mi-a scris in /etc/lprng/printcap:
# APS1_BEGIN:printer1
# - don't delete start label for apsfilter printer1
# - no other printer defines between BEGIN and END LABEL
lp|aps/DESKJET_990;r=600x600;q=medium;c=full;p=a4;m=auto:\
:lp=/dev/lp0:\
:if=/etc/apsfilter/basedir/bin/apsfilter:\
:sd=/var/spool/lpd/lp:\
:lf=/var/spool/lpd/lp/log:\
:af=/var/spool/lpd/lp/acct:\
:mx#0:\
:sh:
# APS1_END - don't delete this
DJ9xxVIP zice ca suporta hp990*. Daca print cu comanda
lpr -Z'duplex' file.ps
primesc e-mail de la daemon:
> You requested to print a file in duplex mode. The even pages have been
> sent to the printer "aps".
> Wait for all pages to be ejected, then flip the sheets and put them back
> into the printer. Please insert them so that the binding is on the
> long edge of the _virtual_ page.
>
> To print the odd pages, enter the following command:
>
> echo '0b0359ab08e0f8a0' > '/tmp/apsfilter5747/duplex-key'
>
> Note: This command must be entered on a single line. Use cut-and-paste
> whenever possible -- switch off auto-wrapping of lines in your mail
> reader if needed.
>
>
> Do not reply to this message. It was generated by apsfilter. In case
> of an error, please contact your system administator.
>
adica se comporta ca si cum imprimanta nu este duplex.
Daca modific /etc/apsfilter/apsfilterrc, scotind comentariul de la
HARDWARE_DUPLEX=Set, atunci imprima paginile separate, si nu mai trimite
e-mail-ul.
As folosi ifhp, dar nu este trecut suport pentru hp990*. Daca rulez
lprngtool, nu-mi recunoaste intrarile din /etc/printcap facute de
apsfilterconfig. Din lista de hp (nu este 990), daca aleg 890, sau altele,
si configurez restul, tot nu imprima duplex, ci pe doua pagini.
Am luat la rind printing howto, lprng howto, paginile de la hp referitoare
la linux, helpurile de la apsfilter, ifhp, am cautat cu google dupa hp990
duplex, etc. Peste tot se spune ca hp990 merge OK cu hpijs, dar nimeni nu
spune exact cum.
Ce sa ma fac, unde sa mai umblu, ce am gresit la configurari? Pina la urma
mi-am zis poate nu i-am pus bine capacul ala de la spate care intoarce
foaia si mi-am calcat pe inima, am reboot-at calculatorul de pa partitia
de win98 (pe care inca nu am sters-o) si am instalat imprimanta si am
testat-o. Imprima duplex dupa ce am intrat pe la config.
Orice sugestie este apreciata.
Multumesc,
Mugurel
---
Pentru dezabonare, trimiteti mail la
[EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
