Pe data de Joi 01 Aug 2002 06:38, aţi scris:
##Toate bune pana la "replacedefaultroute" - optiune care nu
##functioneaza pe versiunile de pppd actuale (2.4.1) din
##RedHat 7.3 etc. (man pppd|grep replacedfaultroute ????)
##
##Asadar stergi replacedefaultroute si lasi defaultroute
##fara #
##
##(eventual mai stergi si /etc/ppp/resolv.conf)
##
##>
##> 12. Once the editor started, type in the following commands
##> in order:[14]
##>
##> ttyS0 115200 crtscts
##> connect '/usr/sbin/chat -v -f /etc/ppp/chat-zappmobile'
##> noauth
##> #defaultroute
##> replacedefaultroute
##> #-detach
##> persist
##> passive
##>
##> Each command will be, of course, ended by Enter
##>
##> In this example, the phone has been installed on COM1 (ttyS0)
##>
##> If the phone is attached to another serial port, you will
##> substitute ttyS0
##> with ttyS# accordingly
##>
##> where # is 1 for COM2, etc.
##
##Salutari,
##Laurentiu Iacob
##
##
##******************************************************************************
##The information contained in this communication is confidential and
##may be legally privileged. It is intended solely for the use of the
##individual or entity to whom it is addressed and others authorised to
##receive it. If you are not the intended recipient you are hereby
##notified that any disclosure, copying, distribution or taking action in
##reliance of the contents of this information is strictly prohibited and
##may be unlawful. Orange Romania SA is neither liable for the proper,
##complete transmission of the information contained in this communication
##nor any delay in its receipt.
##******************************************************************************
##
##---
##Pentru dezabonare, trimiteti mail la
##[EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
##REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
##
##
##
##
am comentat replacedefaultroute ca am vazut ca nu stie parametru asta, chiar inainte
sa dau mailul de ieri... (da` nu cred ca am decomentat defaultroute).
acu` a fugit tel cu sefu` care-l are-n teste si nu mai pot sa-i dau in gura... da`
intrebarea e, dupa conectare nu tre sa vaz (ifconfig) un ppp0?
pt ca tel se conecta, arata 9600 (minim cand nu se transfera nimic pe teava), da` ruta
pe ppp0 nu puteam sa fac ca ifconfig arata doar eth-urile.
merci.
--
<gotto>
---
Pentru dezabonare, trimiteti mail la
[EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
