Cum utilizez scriptul cbq.init pt ca userul LAN 192.168.0.12 sa aiba acces la Internet
cu < 10k (orice serviciu)?
Nu merge cu urmatorul fisier de configurare:cbq-0000.example :
..............................
DEVICE=eth0,10Mbit,1Mbit
RATE=10Kbit
WEIGHT=1Kbit
PRIO=5
RULE=192.168.0.12
DEVICE=eth1,10Mbit,1Mbit
RATE=10Kbit
WEIGHT=1Kbit
PRIO=5
RULE=192.168.0.12
.............................
In consola am:
[root@server cbq]# /etc/rc.d/cbq.init compile
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1 cbq bandwidth 10Mbit avpkt 1000 cell 8
tc class change dev eth0 root cbq weight 1Mbit allot 1514
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1 cbq bandwidth 10Mbit avpkt 1000 cell 8
tc class change dev eth1 root cbq weight 1Mbit allot 1514
**CBQ: class ID of cbq-0000.example must be in range <0002-FFFF>!
tc qdisc del dev lo root
tc qdisc del dev eth0 root
tc qdisc del dev eth1 root
[root@server cbq]# /etc/rc.d/cbq.init start
Tx in advance for any help
---
Pentru dezabonare, trimiteti mail la
[EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
