Iti lipseste comanda switchport mode trunk pe gi 0/2
On Wed, Mar 05, 2003 at 04:00:33PM +0100, Ciprian Niculescu wrote:
> de vreo 2 ore ma tot chinui sa inteleg de ce nu merge, poate ma lumineaza
> cineva
>
> se da asa: R1 -- SW -- R2
>
> R1#ping 192.168.200.10
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.168.200.10, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
> R1#ping 192.168.200.2
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.168.200.2, timeout is 2 seconds:
> .....
> Success rate is 0 percent (0/5)
> R1#
>
> R1:
> interface FastEthernet0/1
> ip address 192.168.200.1 255.255.255.0
> speed auto
> half-duplex
> !
> SW:
> interface GigabitEthernet0/1
> switchport access vlan 2
> no ip address
> !
> interface GigabitEthernet0/2
> switchport trunk encapsulation dot1q
> switchport trunk allowed vlan 1-3,1002-1005
> no ip address
> interface Vlan2
> ip address 192.168.200.10 255.255.255.0
> !
>
> R2:
> interface FastEthernet0/0
> no ip address
> duplex auto
> speed auto
> !
> interface FastEthernet0/0.1
> encapsulation dot1Q 2
> ip address 192.168.200.2 255.255.255.0
> !
>
> --
> Pentru dezabonare, trimiteti mail la
> [EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
> REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
>
--
Teodor Iacob,
Network Administrator
Astral TELECOM Internet
--
Pentru dezabonare, trimiteti mail la
[EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
