Mah baieti am si eu o problema . Vreau sa ma conectez la dial-up (Xnet) ,
si nu prea merge . Pana acum am folosit kppp , dar cum nu am o pasiune
deosebita pentru kde , si spatiul de pe hdd e mult prea pretios , sa tin
45 MB de dependinte doar pt. kppp ....
Am sapat io ce am sapat si am ajuns la urmatoarea concluzie :
# /usr/sbin/pppd /dev/modem 57600 logfile ~/pppd.log debug user
usernameu_meu connect "/usr/sbin/chat -v '' ATD2054444 CONNECT '\d\c'"
Problema este ca dupa autentificare se intampla ceva ciudat . Si ca sa va
arat , iata logul (putin comentat) al unei conexiuni .
-----------------------------
Serial connection established.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/modem
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xcc0cece1> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0xa0000> <auth pap> <magic
0x4d806f48> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0xa0000> <auth pap> <magic
0x4d806f48> <pcomp> <accomp>]
rcvd [LCP ConfRej id=0x1 <asyncmap 0x0>]
sent [LCP ConfReq id=0x2 <magic 0xcc0cece1> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x2 <magic 0xcc0cece1> <pcomp> <accomp>]
sent [PAP AuthReq id=0x1 user="user_nameu_meu" password=<hidden>]
[..........vrea user/parola , ii dau user/parola.................]
rcvd [LCP ConfReq id=0x16 <magic 0x35ac9958> <mru 1500> <auth pap> <pcomp>
<accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xd74dd5a2> <pcomp> <accomp>]
sent [LCP ConfAck id=0x16 <magic 0x35ac9958> <mru 1500> <auth pap> <pcomp>
<accomp>]
rcvd [LCP ConfAck id=0x3 <asyncmap 0x0> <magic 0xd74dd5a2> <pcomp> <accomp>]
sent [PAP AuthReq id=0x2 user="user_nameu_meu" password=<hidden>]
[..............hmmm , le vrea din nou............]
rcvd [PAP AuthAck id=0x2 ""]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01> <ms-dns1
0.0.0.0> <ms-dns3 0.0.0.0>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [IPCP ConfReq id=0x66 <addr 217.10.222.230>]
sent [IPCP ConfAck id=0x66 <addr 217.10.222.230>]
[....... IP-ul router-ului/dial-in server-ului lor ???.................]
rcvd [LCP ProtRej id=0x17 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfNak id=0x2 <addr 213.233.78.168> <ms-dns1 193.230.161.10>
<ms-dns3 193.230.161.9>]
sent [IPCP ConfReq id=0x3 <addr 213.233.78.168> <ms-dns1 193.230.161.10>
<ms-dns3 193.230.161.9>]
rcvd [IPCP ConfAck id=0x3 <addr 213.233.78.168> <ms-dns1 193.230.161.10>
<ms-dns3 193.230.161.9>]
[........... DHCP-ul imi da si mie un IP ............]
local IP address 213.233.78.168
remote IP address 217.10.222.230
primary DNS address 193.230.161.10
secondary DNS address 193.230.161.9
Script /etc/ppp/ip-up started (pid 9061)
Script /etc/ppp/ip-up finished (pid 9061), status = 0x0
[........nu m-am uitat in scipt , da' presupun ca seteaza tabela de routare
, vezi mai jos ca o dau si pe aia.....]
rcvd [LCP EchoReq id=0x0 magic=0x35ac9958]
sent [LCP EchoRep id=0x0 magic=0xd74dd5a2]
rcvd [LCP EchoReq id=0x1 magic=0x35ac9958]
sent [LCP EchoRep id=0x1 magic=0xd74dd5a2]
rcvd [LCP EchoReq id=0x2 magic=0x35ac9958]
sent [LCP EchoRep id=0x2 magic=0xd74dd5a2]
rcvd [LCP EchoReq id=0x3 magic=0x35ac9958]
sent [LCP EchoRep id=0x3 magic=0xd74dd5a2]
[.....ati prins ideea , se repeta la nesfarsit .........]
rcvd [LCP EchoReq id=0x5b magic=0x35ac9958]
sent [LCP EchoRep id=0x5b magic=0xd74dd5a2]
[....asta e momentul cand ma enervez , ^C....]
Terminating on signal 15.
Script /etc/ppp/ip-down started (pid 9182)
sent [LCP TermReq id=0x4 "User request"]
Script /etc/ppp/ip-down finished (pid 9182), status = 0x0
sent [LCP TermReq id=0x5 "User request"]
Connection terminated.
Connect time 15.5 minutes.
Sent 5585 bytes, received 2416 bytes.
[.....si asa se duc 15 minute din viata.....]
--------------------------
si daca ajuta cu ceva :
$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
217.10.200.42 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
Poate sa ma scoata cineva din ceatza ?
P.S. Sintaxa corecta RTFM este :
# RTFM [-l link_util] [-h how-to_util]
:)
-------------------------------------------------------
Xnet scaneaza automat toate mesajele impotriva virusilor folosind RAV AntiVirus.
Xnet automatically scans all messages for viruses using RAV AntiVirus.
Nota: RAV AntiVirus poate sa nu detecteze toti virusii noi sau toate variantele lor.
Va rugam sa luati in considerare ca exista un risc de fiecare data cand deschideti
fisiere atasate si ca MobiFon nu este responsabila pentru nici un prejudiciu cauzat
de virusi.
Disclaimer: RAV AntiVirus may not be able to detect all new viruses and variants.
Please be aware that there is a risk involved whenever opening e-mail attachments
to your computer and that MobiFon is not responsible for any damages caused by
viruses.
