DA... nu s-a intamplat nimic in cele 6 luni decand merge non-stop :)
Asa e setat:
/usr/sbin/hdparm -m 16 -c3 -a1 -A1 -X 70 /dev/hda
Model=Maxtor 6E030L0, FwRev=NAR61590, SerialNo=E116SH8E
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=60058656
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null): 1 2 3 4 5 6 7
Radu Radoveneanu wrote:
>cand KobrAs a scris :
>zice ceva de gen-ul
>/dev/hda:
>
> Model=3DMaxtor 6E020L0, FwRev=3DNAR61590, SerialNo=3DE16XR5NE
> Config=3D{ Fixed }
> RawCHS=3D16383/16/63, TrkSize=3D0, SectSize=3D0, ECCbytes=3D57
> BuffType=3DDualPortCache, BuffSize=3D2048kB, MaxMultSect=3D16, =
>MultSect=3D16
> CurCHS=3D16383/16/63, CurSects=3D16514064, LBA=3Dyes, =
>LBAsects=3D40718160
> IORDY=3Don/off, tPIO=3D{min:120,w/IORDY:120}, tDMA=3D{min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6
> AdvancedPM=3Dyes: disabled (255) WriteCache=3Denabled
> Drive conforms to: (null): 1 2 3 4 5 6 7
>
>vreau sa se observe de aici udma6 care cica ar fii ata133 ...=20
>si-a setat cineva hdd-urile asa? adica -X70 ?
>
>------
>save the ozone layer
>
>
>
