VD> Daca in dmesg la redhatul tau nu apare ca ar fi recunoscut raid-ul,
VD> atunci... nu merge, trebuie sa
VD> folosesti kernel mai nou.
Cam asta imi raporteaza uname, lscpi si dmesg:
[EMAIL PROTECTED] root]# uname -r
2.4.20-8
lspci
-----
01:03.0 RAID bus controller: CMD Technology Inc PCI0680 (rev 02)
dmesg
-----
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
PCI: Found IRQ 5 for device 00:1f.1
PCI: Sharing IRQ 5 with 00:1d.2
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
SiI680: IDE controller at PCI slot 01:03.0
PCI: Found IRQ 10 for device 01:03.0
PCI: Sharing IRQ 10 with 00:1d.1
SiI680: chipset revision 2
SiI680: not 100% native mode: will probe irqs later
SiI680: BASE CLOCK == 133
