On Monday 25 August 2003 17:28, mmihai wrote: Verifica ce zice la sfarsitul fisierului configure.log (sau config.log) si zi-ne si noua ce vezi acolo.
> Buna listashi, > > Pe un RH-9 nu pot instala versiunea de avifile din subject, desi, > qt-3.1 e instalat, de asemeni qt-designer si qt-Xt. > De asemeni in /etc/ld.so.conf e trecut "/usr/lib/qt-3.1/lib" > Pe de alta parte am incercat si cu exportarea lui qt, exact cum e sugerat > in ultimul rind al mesajului de eroare de mai jos. > Si nu vrea ! Da mereu eroarea data la final-ul mail-ului ! > Please help. Ce e de facut ? > > Multumesc > > > ####################################################### > checking for main in -lqt-mt... no > checking for Qt library (version >= 200)... no > configure: warning: > *** Could not run Qt test program, checking why... > *** Configure discovered/uses these settings: > *** Qt libraries: /usr/lib/qt-3.1/lib > *** Qt headers: /usr/lib/qt-3.1/include > *** Note: > *** Compilation of Qt utilities also might be turned off (if not > wanted). *** If you are experiencing problems which will not be > described *** bellow please report then on '[EMAIL PROTECTED]' mailing > list *** (i.e. some misdetection or omitted path) > > configure: error: > *** Qt test program compiled, but did not run. This usually means > *** that the run-time linker is not finding Qt library or finding the wrong > *** version of Qt. If it is not finding Qt, you will need to set your > *** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point > *** to the installed location Also, make sure you have run ldconfig if > that *** is required on your system. > *** > *** If you have an old version installed, it is best to remove it, although > *** you may also be able to get things to work by modifying LD_LIBRARY_PATH > *** > *** i.e. bash> export LD_LIBRARY_PATH=/usr/lib/qt-3.1/lib:$LD_LIBRARY_PATH > ################################################################### -- Serghei. --- Detalii despre listele noastre de mail: http://www.lug.ro/
