Lasa-l in pace ca nu are legatura. Problema este ca, kppp-ul foloseste
chap sau pap, pe cand wvdial se asteapta la niste scripturi. Pentru o
mai buna exemplificare. la windows este diferenta intre a te conecta
direct (chestia aia cu "Bring up terminal after dial" care iti afisaza
un dialog in care te autentifici, sau conectarea cu ajutorul
protocolului, in care bagi userul si parola la inceput.
Poti cel mai bine sa folosesti pppd + chat asa:
Daca nu exista, creezi directoarele /etc/ppp; /etc/ppp/peers
in /etc/ppp/peers faci un fisier (nu are importanta numele), in care pui:
asyncmap 0
crtscts
#-detach
debug
defaultroute
lock
modem
mru 576
mtu 576
passive
/dev/ttyS1 115200
name UnNumeOarecare
user XXXX
connect '/usr/sbin/chat -v \
ABORT BUSY \
ABORT "NO CARRIER" \
"" "atz" \
OK atdt<numarul_de_Telefon_dialup> \
CONNECT'
in /etc/ppp faci doua fisiere, pap-secrets si chap-secrets in care pui
(in amandoua la fel):
# client server secret IP addresses
Userul_Tau * Parola_ta *
Mare atentie. Pune si stelutele exact cum sunt.
Te conectezi din terminal folosind comanda pppd file
/etc/ppp/peers/fiserul_creat
Succes.
Sorin
>-----BEGIN PGP SIGNED MESSAGE-----
>Hash: SHA1
>
>On Monday 06 October 2003 19:32, you wrote:
>
>Salut Andrei!
>
>Exista pe Gentoo wvdialconf ?
>
>cred ar trebui sa existe
>
>incearca wvdialconf /etc/wvdial.conf
>si apoi vwzi ce mai e de pus in wvdial.conf
>
>hai sa-ti dau si o mostra de wvdial.conf
>
>
>[Modem0]
>Modem = /dev/ttyS0
>Baud = 115200
>Init1 = ATZ
>Init2 = ATQ0 V1 E1 M1L3=7 S0=0 &C1 &D2 S11=55 +FCLASS=0
>
>[Modem1]
>Modem = /dev/ttyS1
>Baud = 115200
>Init1 = ATZ
>Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
>
>[Dialer Defaults]
>Modem = /dev/ttyS0
>Baud = 115200
>Init1 = ATZ
>Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
>
>[Dialer remote_admin]
>Username = whatever
>Password = some_pass
>Phone = ,some_phone_numeber
>Inherits = Modem0
>Stupid mode = 0
>
>
>
>
>>Salutare colistashi.
>>Am si eu urmatoarea problema: pe un sistem gentoo (gaming-sources) incerc
>>sa ma conectez la Xnet. Cu kppp, merge. Cu wvdial sau pppd, nu merge. Ce
>>pusca mea ii face kppp lui pppd nu stiu, pentru ca am folosit aceeasi
>>parametri si din consola si nu a vrut. Help! Am incercat cu wvdial care
>>lanseaza pppd, pppd care lanseaza wvdial --chat si cu pppd care lanseaza
>>chat.
>>
>>Din cate imi dau seama din loguri, serverul raspunde cu un pachet LCP care
>>zice "ma auth cu pap" in cazul kppp, iar in celelalte cazuri nu mai
>>trimite acest pachet.
>>
>>10x,
>>dannutz
>>
>>Loguri relevante:
>>
>>Iata cum arata pppd lansat de kppp (care merge):
>>
>>Oct 6 18:33:51 [pppd] pppd options in effect:
>>Oct 6 18:33:51 [pppd] debug debug # (from command line)
>>Oct 6 18:33:51 [pppd] -detach # (from command line)
>>Oct 6 18:33:51 [pppd] dump # (from /etc/ppp/options)
>>Oct 6 18:33:51 [pppd] user dannutz # (from command line)
>>Oct 6 18:33:51 [pppd] 57600 # (from command line)
>>Oct 6 18:33:51 [pppd] lock # (from /etc/ppp/options)
>>Oct 6 18:33:51 [pppd] crtscts # (from command line)
>>Oct 6 18:33:51 [pppd] defaultroute # (from command line)
>>Oct 6 18:33:51 [pppd] usepeerdns # (from command line)
>>Oct 6 18:33:51 [pppd] pppd 2.4.1 started by root, uid 0
>>Oct 6 18:33:51 [pppd] using channel 19
>>Oct 6 18:33:51 [pppd] Using interface ppp0
>>Oct 6 18:33:51 [pppd] Connect: ppp0 <--> /dev/tts/LT0
>>Oct 6 18:33:51 [pppd] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic
>>0x1038bcd4> <pcomp> <accomp>]
>>Oct 6 18:33:51 [pppd] rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap
>>0xa0000> <auth pap> <magic 0x92551a3b> <pcomp> <accomp>]
>>Oct 6 18:33:51 [pppd] sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap
>>0xa0000> <auth pap> <magic 0x92551a3b> <pcomp> <accomp>]
>>Oct 6 18:33:51 [pppd] rcvd [LCP ConfRej id=0x1 <asyncmap 0x0>]
>>Oct 6 18:33:51 [pppd] sent [LCP ConfReq id=0x2 <magic 0x1038bcd4> <pcomp>
>><accomp>]
>>Oct 6 18:33:51 [pppd] rcvd [LCP ConfAck id=0x2 <magic 0x1038bcd4> <pcomp>
>><accomp>]
>>Oct 6 18:33:51 [pppd] cbcp_lowerup
>>Oct 6 18:33:51 [pppd] want: 2
>>Oct 6 18:33:51 [pppd] sent [PAP AuthReq id=0x1 user="dannutz"
>>password=<hidden>]
>>Oct 6 18:33:51 [pppd] rcvd [LCP ConfReq id=0x9b <magic 0x4102438c> <mru
>>1500> <auth pap> <pcomp> <accomp>]
>>Oct 6 18:33:51 [pppd] cbcp_lowerdown
>>Oct 6 18:33:51 [pppd] sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic
>>0xa8cdb219> <pcomp> <accomp>]
>>Oct 6 18:33:51 [pppd] sent [LCP ConfAck id=0x9b <magic 0x4102438c> <mru
>>1500> <auth pap> <pcomp> <accomp>]
>>Oct 6 18:33:51 [pppd] rcvd [LCP ConfAck id=0x3 <asyncmap 0x0> <magic
>>0xa8cdb219> <pcomp> <accomp>]
>>Oct 6 18:33:51 [pppd] cbcp_lowerup
>>Oct 6 18:33:51 [pppd] want: 2
>>Oct 6 18:33:51 [pppd] sent [PAP AuthReq id=0x2 user="dannutz"
>>password=<hidden>]
>>Oct 6 18:33:52 [pppd] rcvd [PAP AuthAck id=0x2 ""]
>>Oct 6 18:33:52 [pppd] sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress
>>VJ 0f 01> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
>>Oct 6 18:33:52 [pppd] sent [CCP ConfReq id=0x1 <deflate 15>
>><deflate(old#) 15> <bsd v1 15>]
>>Oct 6 18:33:52 [pppd] rcvd [IPCP ConfReq id=0xc5 <addr 217.10.200.42>]
>>Oct 6 18:33:52 [pppd] sent [IPCP ConfAck id=0xc5 <addr 217.10.200.42>]
>>Oct 6 18:33:52 [pppd] rcvd [LCP ProtRej id=0x9c 80 fd 01 01 00 0f 1a 04
>>78 00 18 04 78 00 15 03 2f]
>>Oct 6 18:33:52 [pppd] rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
>>Oct 6 18:33:52 [pppd] sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1
>>0.0.0.0> <ms-dns3 0.0.0.0>]
>>Oct 6 18:33:52 [pppd] rcvd [IPCP ConfNak id=0x2 <addr 213.233.72.241>
>><ms-dns1 193.230.161.10> <ms-dns3 193.230.161.9>]
>>Oct 6 18:33:52 [pppd] sent [IPCP ConfReq id=0x3 <addr 213.233.72.241>
>><ms-dns1 193.230.161.10> <ms-dns3 193.230.161.9>]
>>Oct 6 18:33:52 [pppd] rcvd [IPCP ConfAck id=0x3 <addr 213.233.72.241>
>><ms-dns1 193.230.161.10> <ms-dns3 193.230.161.9>]
>>Oct 6 18:33:52 [pppd] local IP address 213.233.72.241
>>Oct 6 18:33:52 [pppd] remote IP address 217.10.200.42
>>Oct 6 18:33:52 [pppd] primary DNS address 193.230.161.10
>>Oct 6 18:33:52 [pppd] secondary DNS address 193.230.161.9
>>Oct 6 18:33:52 [pppd] Script /etc/ppp/ip-up started (pid 3408)
>>Oct 6 18:33:52 [pppd] Script /etc/ppp/ip-up finished (pid 3408), status =
>>0x0
>>Oct 6 18:34:01 [pppd] rcvd [LCP EchoReq id=0x0 magic=0x4102438c]
>>Oct 6 18:34:01 [pppd] sent [LCP EchoRep id=0x0 magic=0xa8cdb219]
>>Oct 6 18:34:11 [pppd] rcvd [LCP EchoReq id=0x1 magic=0x4102438c]
>>Oct 6 18:34:11 [pppd] sent [LCP EchoRep id=0x1 magic=0xa8cdb219]
>>Oct 6 18:34:21 [pppd] rcvd [LCP EchoReq id=0x2 magic=0x4102438c]
>>Oct 6 18:34:21 [pppd] sent [LCP EchoRep id=0x2 magic=0xa8cdb219]
>>Oct 6 18:34:28 [pppd] Terminating on signal 15.
>>
>>Iata cum arata pppd din consola, care lanseaza wvdial --chat:
>>
>>Oct 6 19:08:14 [pppd] pppd options in effect:
>>Oct 6 19:08:14 [pppd] debug debug # (from /etc/ppp/peers/xnet)
>>Oct 6 19:08:14 [pppd] -detach # (from /etc/ppp/peers/xnet)
>>Oct 6 19:08:14 [pppd] dump # (from /etc/ppp/peers/xnet)
>>Oct 6 19:08:14 [pppd] user dannutz # (from /etc/ppp/peers/xnet)
>>Oct 6 19:08:14 [pppd] /dev/tts/LT0 # (from /etc/ppp/peers/xnet)
>>Oct 6 19:08:14 [pppd] 57600 # (from /etc/ppp/peers/xnet)
>>Oct 6 19:08:14 [pppd] lock # (from /etc/ppp/options)
>>Oct 6 19:08:14 [pppd] connect wvdial --chat # (from /etc/ppp/peers/xnet)
>>Oct 6 19:08:14 [pppd] crtscts # (from /etc/ppp/peers/xnet)
>>Oct 6 19:08:14 [pppd] defaultroute # (from /etc/ppp/peers/xnet)
>>Oct 6 19:08:14 [pppd] usepeerdns # (from /etc/ppp/peers/xnet)
>>Oct 6 19:08:14 [pppd] pppd 2.4.1 started by root, uid 0
>>Oct 6 19:08:16 [wvdial] WvDial: Internet dialer version 1.53
>>Oct 6 19:08:16 [wvdial] Initializing modem.
>>Oct 6 19:08:16 [wvdial] Sending: ATZ
>>Oct 6 19:08:16 [wvdial] ATZ
>>Oct 6 19:08:16 [wvdial] OK
>>Oct 6 19:08:16 [wvdial] Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>Oct 6 19:08:17 [wvdial] ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>Oct 6 19:08:17 [wvdial] OK
>>Oct 6 19:08:17 [wvdial] Modem initialized.
>>Oct 6 19:08:17 [wvdial] Sending: ATDT0,2054444
>>Oct 6 19:08:17 [wvdial] Waiting for carrier.
>>Oct 6 19:08:17 [wvdial] ATDT0,2054444
>>Oct 6 19:08:48 [wvdial] CONNECT 53333 V42bis
>>Oct 6 19:08:48 [wvdial] Carrier detected. Waiting for prompt.
>>Oct 6 19:08:49 [wvdial] CVX Access Switch.
>>Oct 6 19:08:49 [wvdial] Access is restricted to authorized users only.
>>Oct 6 19:08:49 [wvdial] login:
>>Oct 6 19:08:49 [wvdial] Looks like a login prompt.
>>Oct 6 19:08:49 [wvdial] Sending: dannutz
>>Oct 6 19:08:49 [wvdial] dannutz
>>Oct 6 19:08:49 [wvdial] password:
>>Oct 6 19:08:49 [wvdial] Looks like a password prompt.
>>Oct 6 19:08:49 [wvdial] Sending: (password)
>>Oct 6 19:08:50 [wvdial] Valid commands are:
>>Oct 6 19:08:50 [wvdial] quit Hang up and disconnect
>>Oct 6 19:08:50 [wvdial] help List valid commands
>>Oct 6 19:08:51 [wvdial] >
>>Oct 6 19:08:51 [wvdial] Hmm... a prompt. Sending "ppp".
>>Oct 6 19:08:51 [wvdial] ppp
>>Oct 6 19:08:51 [wvdial] 'ppp' is not a valid command.
>>Oct 6 19:08:51 [wvdial] Valid commands are:
>>Oct 6 19:08:51 [wvdial] quit Hang up and disconnect
>>Oct 6 19:08:51 [wvdial] help List valid commands
>>Oct 6 19:08:52 [wvdial] >
>>Oct 6 19:08:52 [wvdial] Hmm... a prompt. Sending "ppp".
>>Oct 6 19:08:52 [wvdial] ppp
>>Oct 6 19:08:52 [wvdial] 'ppp' is not a valid command.
>>Oct 6 19:08:52 [wvdial] Valid commands are:
>>Oct 6 19:08:52 [wvdial] quit Hang up and disconnect
>>Oct 6 19:08:52 [wvdial] help List valid commands
>>Oct 6 19:08:53 [wvdial] >
>>Oct 6 19:08:53 [wvdial] Hmm... a prompt. Sending "ppp".
>>Oct 6 19:08:53 [wvdial] ppp
>>Oct 6 19:08:53 [wvdial] 'ppp' is not a valid command.
>>Oct 6 19:08:53 [wvdial] Valid commands are:
>>Oct 6 19:08:53 [wvdial] quit Hang up and disconnect
>>Oct 6 19:08:53 [wvdial] help List valid commands
>>Oct 6 19:08:53 [wvdial] >
>>Oct 6 19:08:53 [wvdial] Don't know what to do! Starting pppd and hoping
>>for the best.
>>Oct 6 19:08:53 [pppd] Serial connection established.
>>Oct 6 19:08:53 [pppd] using channel 26
>>Oct 6 19:08:54 [pppd] Using interface ppp0
>>Oct 6 19:08:54 [pppd] Connect: ppp0 <--> /dev/tts/LT0
>>Oct 6 19:08:55 [pppd] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic
>>0x960958e2> <pcomp> <accomp>]
>>Oct 6 19:08:55 [pppd] rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic
>>0x960958e2> <pcomp> <accomp>]
>>Oct 6 19:08:55 [pppd] sent [LCP ConfNak id=0x1 <magic 0xfbcb80f>]
>>Oct 6 19:08:55 [pppd] rcvd [LCP ConfNak id=0x1 <magic 0xfbcb80f>]
>>Oct 6 19:08:55 [pppd] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic
>>0x3881f48b> <pcomp> <accomp>]
>>Oct 6 19:08:55 [pppd] rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic
>>0x3881f48b> <pcomp> <accomp>]
>>Oct 6 19:08:55 [pppd] sent [LCP ConfNak id=0x2 <magic 0xc28e5960>]
>>Oct 6 19:08:55 [pppd] rcvd [LCP ConfNak id=0x2 <magic 0xc28e5960>]
>>Oct 6 19:08:55 [pppd] sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic
>>0xa44bba07> <pcomp> <accomp>]
>>Oct 6 19:08:56 [pppd] rcvd [LCP ConfReq id=0x3 <asyncmap 0x0> <magic
>>0xa44bba07> <pcomp> <accomp>]
>>Oct 6 19:08:56 [pppd] sent [LCP ConfNak id=0x3 <magic 0xca184353>]
>>Oct 6 19:08:56 [pppd] rcvd [LCP ConfNak id=0x3 <magic 0xca184353>]
>>Oct 6 19:08:56 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0x643bd8a9> <pcomp> <accomp>]
>>Oct 6 19:08:59 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0x643bd8a9> <pcomp> <accomp>]
>>Oct 6 19:09:02 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0x643bd8a9> <pcomp> <accomp>]
>>Oct 6 19:09:05 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0x643bd8a9> <pcomp> <accomp>]
>>Oct 6 19:09:08 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0x643bd8a9> <pcomp> <accomp>]
>>Oct 6 19:09:11 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0x643bd8a9> <pcomp> <accomp>]
>>Oct 6 19:09:14 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0x643bd8a9> <pcomp> <accomp>]
>>Oct 6 19:09:17 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0x643bd8a9> <pcomp> <accomp>]
>>Oct 6 19:09:20 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0x643bd8a9> <pcomp> <accomp>]
>>Oct 6 19:09:23 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0x643bd8a9> <pcomp> <accomp>]
>>Oct 6 19:09:24 [pppd] Terminating on signal 2.
>>
>>Iata pppd lansat de catre wvdial (baga niste optiuni in plus, dar nu cred
>>ca afecteaza):
>>
>>Oct 6 18:44:29 [pppd] pppd options in effect:
>>Oct 6 18:44:29 [pppd] debug # (from /etc/ppp/options)
>>Oct 6 18:44:29 [pppd] -detach # (from command line)
>>Oct 6 18:44:29 [pppd] idle 0 # (from command line)
>>Oct 6 18:44:29 [pppd] logfd 6 # (from command line)
>>Oct 6 18:44:29 [pppd] dump # (from /etc/ppp/options)
>>Oct 6 18:44:29 [pppd] user dannutz # (from command line)
>>Oct 6 18:44:29 [pppd] usehostname # (from command line)
>>Oct 6 18:44:29 [pppd] 57600 # (from command line)
>>Oct 6 18:44:29 [pppd] lock # (from /etc/ppp/options)
>>Oct 6 18:44:29 [pppd] crtscts # (from command line)
>>Oct 6 18:44:29 [pppd] modem # (from command line)
>>Oct 6 18:44:29 [pppd] noipdefault # (from command line)
>>Oct 6 18:44:29 [pppd] defaultroute # (from command line)
>>Oct 6 18:44:29 [pppd] usepeerdns # (from command line)
>>Oct 6 18:44:29 [pppd] pppd 2.4.1 started by root, uid 0
>>Oct 6 18:44:29 [pppd] using channel 21
>>Oct 6 18:44:29 [pppd] Using interface ppp0
>>Oct 6 18:44:29 [pppd] Connect: ppp0 <--> /dev/tts/LT0
>>Oct 6 18:44:29 [pppd] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic
>>0x10e09bb1> <pcomp> <accomp>]
>>Oct 6 18:44:29 [pppd] rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic
>>0x10e09bb1> <pcomp> <accomp>]
>>Oct 6 18:44:29 [pppd] sent [LCP ConfNak id=0x1 <magic 0xdc3e2432>]
>>Oct 6 18:44:29 [pppd] rcvd [LCP ConfNak id=0x1 <magic 0xdc3e2432>]
>>Oct 6 18:44:29 [pppd] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic
>>0x9d087172> <pcomp> <accomp>]
>>Oct 6 18:44:29 [pppd] rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic
>>0x9d087172> <pcomp> <accomp>]
>>Oct 6 18:44:29 [pppd] sent [LCP ConfNak id=0x2 <magic 0xdafd11bb>]
>>Oct 6 18:44:30 [pppd] rcvd [LCP ConfNak id=0x2 <magic 0xdafd11bb>]
>>Oct 6 18:44:30 [pppd] sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic
>>0x62f5fac6> <pcomp> <accomp>]
>>Oct 6 18:44:30 [pppd] rcvd [LCP ConfReq id=0x3 <asyncmap 0x0> <magic
>>0x62f5fac6> <pcomp> <accomp>]
>>Oct 6 18:44:30 [pppd] sent [LCP ConfNak id=0x3 <magic 0x40d56ea6>]
>>Oct 6 18:44:30 [pppd] rcvd [LCP ConfNak id=0x3 <magic 0x40d56ea6>]
>>Oct 6 18:44:30 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0xd237dd00> <pcomp> <accomp>]
>>Oct 6 18:44:33 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0xd237dd00> <pcomp> <accomp>]
>>Oct 6 18:44:36 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0xd237dd00> <pcomp> <accomp>]
>>Oct 6 18:44:39 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0xd237dd00> <pcomp> <accomp>]
>>Oct 6 18:44:42 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0xd237dd00> <pcomp> <accomp>]
>>Oct 6 18:44:45 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0xd237dd00> <pcomp> <accomp>]
>>Oct 6 18:44:48 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0xd237dd00> <pcomp> <accomp>]
>>Oct 6 18:44:51 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0xd237dd00> <pcomp> <accomp>]
>>Oct 6 18:44:54 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0xd237dd00> <pcomp> <accomp>]
>>Oct 6 18:44:57 [pppd] sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>>0xd237dd00> <pcomp> <accomp>]
>>Oct 6 18:45:00 [pppd] LCP: timeout sending Config-Requests
>>Oct 6 18:45:00 [pppd] Connection terminated.
>>
>>
>>
>>
>>---
>>Detalii despre listele noastre de mail: http://www.lug.ro/
>>
>>
>
>- --
>Cu respect/Best Regards,
>Adrian Mazarache
>
>Public key: http://london.forte.ro/mazasign.asc
>
>-----BEGIN PGP SIGNATURE-----
>Version: GnuPG v1.2.2 (GNU/Linux)
>
>iD8DBQE/glQ9Ebm/AUY3ZdkRApeRAKCRZghhx32yjI8q2sEXjteTC65WKACfbPxr
>SImV5hGByRF+X5MbWLkbEMY=
>=droH
>-----END PGP SIGNATURE-----
>
>---
>Detalii despre listele noastre de mail: http://www.lug.ro/
>
>
>
>
>
---
Detalii despre listele noastre de mail: http://www.lug.ro/
