On Sunday 18 January 2004 17:32, you wrote:
> Outputul lui hdparm -i /dev/hda este identic pt cazurile in care ai
> dma activat sau dezactivat. Steluta aia de la UDMA modes ramane tot
> acolo daca dau hdparm -d 0 /dev/hda. Cel putin asa e la Seagate-ul meu.
tocmai asta vroiam sa spun si eu, dar am vazut ca nu sunt primul. In mod sigur
ai dma 0. Asa e la mine pe maxto, la fel e si pe tot ce am avut pana acum
(ibm, wertern, seagate)
>>>>>
[EMAIL PROTECTED]:~# hdparm -d 0 /dev/hda
/dev/hda:
setting using_dma to 0 (off)
using_dma = 0 (off)
[EMAIL PROTECTED]:~# hdparm -i /dev/hda
/dev/hda:
Model=MAXTOR 6L040J2, FwRev=A93.0500, SerialNo=662221111782
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4
BuffType=DualPortCache, BuffSize=1819kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78177792
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:
* signifies the current active mode
[EMAIL PROTECTED]:~# hdparm -d /dev/hda
/dev/hda:
using_dma = 0 (off)
--
MihaiM
---
Detalii despre listele noastre de mail: http://www.lug.ro/
