n-am zis ca nu merge, am intrebat la ce dreaq iti tre' masq de doua ori?!

sapte

----- Original Message ----- 
From: "Bucur Marian" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, March 11, 2004 11:40 AM
Subject: [rlug] Re: Masq.. problems.


> de ce nu merge de 2 ori?
> 
> 
> > masq doar unde exista interfata cu ip real, nu inainte ... nu inteleg
> > de ce trebuie masq de doua ori?!
> > 
> >sapte
> > ----- Original Message ----- 
> > From: "Bucur Marian" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Thursday, March 11, 2004 1:34 AM
> > Subject: [rlug] Masq.. problems.
> > 
> > 
> >> Hello folks
> >> So..am o retzea interna care iese printr-un serv ce are 2 interfetze.
> >> interf interna:192.168.2.x interf ext 192.168.98.2. La randul ei
> >> interf ext se leaga prin vdsl la 192.168.98.1.. care e interfatza
> >> interna pentru alt server.. care care adresa de ip ext publica de
> >> tipul 213.154.x.x In primul serv am reust masq adreselor de tip
> >> 192.168.2.x.
> >> Problema: pachtele de reteaua 192.168.2.x nu pleaca trec de 213.154..
> >> etc..Adica ajung pe serv al 2-lea masq dar de acolo mu mai sunt inca o
> >> data masq.
> >> tabela de routare pt serv 2
> >> 213.154.138.0   www.websat.ro   255.255.255.128 UG    0      0       
> >> 0 eth0
> >> 213.154.138.0   *               255.255.255.128 U     0      0       
> >> 0 eth0
> >> 10.0.1.0        10.0.1.1        255.255.255.0   UG    0      0       
> >> 0 eth1
> >> 10.0.1.0        *               255.255.255.0   U     0      0       
> >> 0 eth1
> >> 192.168.1.0     ns.firma.websat 255.255.255.0   UG    0      0       
> >> 0 eth1
> >> 192.168.1.0     *               255.255.255.0   U     0      0       
> >> 0 eth1
> >> 192.168.98.0    192.168.98.1    255.255.255.0   UG    0      0       
> >> 0 eth2
> >> 192.168.98.0    *               255.255.255.0   U     0      0       
> >> 0 eth2
> >> 192.168.99.0    192.168.99.1    255.255.255.0   UG    0      0       
> >> 0 eth1
> >> 192.168.99.0    *               255.255.255.0   U     0      0       
> >> 0 eth1
> >> 127.0.0.0       *               255.0.0.0       U     0      0       
> >> 0 lo default         gw.websat.ro    0.0.0.0         UG    0      0   
> >>     0 eth0
> >> Am bagat si regula de ipchains (pe serv2):
> >> ipchains -A forward -s 192.168.98.0/255.255.255.0 -d 0.0.0.0/0.0.0.0
> >> -j MASQ
> >> Cum arata un traceroute pe serv 1: traceroute www.rol.ro
> >> traceroute to www.rol.ro (82.137.12.50), 30 hops max, 38 byte packets
> >>  1  192.168.98.2 (192.168.98.2)  3000.538 ms !H  3000.253 ms !H 
> >>  2997.206
> >> ms !H
> >> Si se opreste
> >> tabela de routare pe serv 1
> >> Destination     Gateway         Genmask         Flags Metric Ref   
> >> Use Iface
> >> 192.168.2.0     *               255.255.255.0   U     0      0       
> >> 0 eth0
> >> 192.168.98.0    *               255.255.255.0   U     0      0       
> >> 0 eth1
> >> 127.0.0.0       *               255.0.0.0       U     0      0       
> >> 0 lo default         192.168.98.2    0.0.0.0         UG    0      0   
> >>     0 eth1
> >>
> >> Orice sugestie e binevenita. Thanks
> >>
> >>
> >>
> >> --- 
> >> Detalii despre listele noastre de mail: http://www.lug.ro/
> >>
> >>
> > 
> > 
> > 
> > --- 
> > Detalii despre listele noastre de mail: http://www.lug.ro/
> 
> 
> 
> --- 
> Detalii despre listele noastre de mail: http://www.lug.ro/
> 
> 


--- 
Detalii despre listele noastre de mail: http://www.lug.ro/


Raspunde prin e-mail lui