Salut.
Am un controller SCSI, Adaptec AIC-7902 dual channel Ultra320 SCSI.
Un hard disk Fujitsu atasat la el, de 140 Gb.
La incercarea de a crea file system pe el, crapa sistemul.
OS - RedHat 9, kernel 2.4.21 de la RedHat Enterprise Linux 3.0.
[EMAIL PROTECTED] root]# modprobe aic79xx
[EMAIL PROTECTED] root]# dmesg
............................
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.10
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz,
512 SCBs
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.10
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz,
512 SCBs
Starting timer : 0 0
blk: queue 7e374e18, I/O limit 4095Mb (mask 0xffffffff)
(scsi1:A:0): 320.000MB/s transfers (160.000MHz DT|IU|RTI|QAS, 16bit)
(scsi1:A:0): 160.000MB/s transfers (80.000MHz DT|IU|QAS, 16bit)
(scsi1:A:0): 160.000MB/s transfers (80.000MHz DT|QAS, 16bit)
(scsi1:A:0): 80.000MB/s transfers (40.000MHz DT|IU|QAS, 16bit)
(scsi1:A:0): 80.000MB/s transfers (40.000MHz DT|QAS, 16bit)
(scsi1:A:0): 80.000MB/s transfers (40.000MHz, 16bit)
(scsi1:A:0): 66.006MB/s transfers (33.003MHz DT|IU|QAS, 16bit)
(scsi1:A:0): 66.006MB/s transfers (33.003MHz DT|QAS, 16bit)
(scsi1:A:0): 66.006MB/s transfers (33.003MHz, 16bit)
(scsi1:A:0): 40.000MB/s transfers (20.000MHz DT|IU|QAS, 16bit)
(scsi1:A:0): 40.000MB/s transfers (20.000MHz DT|QAS, 16bit)
(scsi1:A:0): 40.000MB/s transfers (20.000MHz, 16bit)
(scsi1:A:0): 40.000MB/s transfers (40.000MHz)
Starting timer : 0 0
Vendor: FUJITSU Model: MAP3147NP Rev: 0108
Type: Direct-Access ANSI SCSI revision: 03
Starting timer : 0 0
blk: queue 7e374c18, I/O limit 4095Mb (mask 0xffffffff)
scsi1:A:0:0: Tagged Queuing enabled. Depth 32
..................................................
[EMAIL PROTECTED] root]# mkfs.ext3 /dev/sda1
mke2fs 1.32 (09-Nov-2002)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
17956864 inodes, 35891210 blocks
1794560 blocks (5.00%) reserved for the super user
First data block=0
1096 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632,
2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Writing inode tables: 744/1096
..............................................
Imi crapa aici.
Vreo ideie ?
Nu pot sa fac prea multe experimente, fiindca daca il busesc, trebuie sa sun de
fiecare data la data centru sa-l rebooteze.
--
Best regards,
Raileanu Grigore
mail: grisha at unixro dot net
phone: +40 742759147
---
Detalii despre listele noastre de mail: http://www.lug.ro/
