[EMAIL PROTECTED]:~# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0xffffffff (-1)
Link detected: yes
[EMAIL PROTECTED]:~# ethtool eth1
Settings for eth1:
No data available
la fel si pt eth2.
ifconfig eth1 zice asa:
Link encap:Ethernet HWaddr 00:50:FC:F9:6B:35
inet addr: 10.0.1.89 Bcast:10.0.1.255 Mask:255.255.255.240
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4300465 errors:0 dropped:0 overruns:0 frame:0
TX packets:3386434 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4024984516 (3838.5 Mb) TX bytes:0 (0.0 b)
Interrupt:19 Base address:0x8000
care sa fie buba?!
----- Original Message -----
From: "Ovidiu Gabor" <[EMAIL PROTECTED]>
To: "Mauritius Mihai" <[EMAIL PROTECTED]>
Sent: Wednesday, November 03, 2004 12:58 PM
Subject: [rlug] Re: mii-tool problem
> ethtool ethx
>
>
>
> ---
> Detalii despre listele noastre de mail: http://www.lug.ro/
>
>
>
---
Detalii despre listele noastre de mail: http://www.lug.ro/
