On Thursday 16 June 2005 13:14, Tarhon-Onu Victor wrote: > On Thu, 16 Jun 2005, Serghei Amelian wrote: > > ca modul). Ceva sugestii? > > lspci?
[...] 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) 02:01.0 Ethernet controller: Intel Corporation 82547EI Gigabit Ethernet Controller (LOM) [...] Nu mi se pare nimic deosebit... > dmesg, poate a dezactivat kernelul dma-ul vazind ca > hdd-ul e timpit la cap? [...] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: Maxtor 6Y080P0, ATA DISK drive ide1: I/O resource 0x170-0x177 not free. ide1: ports already in use, skipping probe ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda1 hda2 hda3 [...] SCSI subsystem initialized libata version 1.10 loaded. ata_piix version 1.03 ata_piix: combined mode detected ata: 0x1f0 IDE port busy PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15 ata1: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003 88:207f ata1: dev 0 ATA, max UDMA/133, 72303840 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix Vendor: ATA Model: WDC WD360GD-00FN Rev: 35.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB) SCSI device sda: drive cache: write back SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 ReiserFS: hda3: found reiserfs format "3.6" with standard journal [...] > hdparm -d1 /dev/hdCutare ce spune? /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Asta a fost primul lucru pe care l-am incercat. Si se comporta exact ca atunci cand driverul IDE e compilat ca modul. Chestia e ca din cauza de SATA driverul e incarcat intr-adevar ca modul: [...] ata_piix 13253 0 libata 49220 1 ata_piix sd_mod 22977 0 scsi_mod 136457 2 libata,sd_mod [...] SCSI-ul normal ca nu are greturi cu chestia asta, dar ATA... -- Serghei. --- Detalii despre listele noastre de mail: http://www.lug.ro/
