Hi, I have a fairly large lustre file system (3.5PB) that I have run an initial scan on that has been running without and real activity for more than a day and I am wondering if it is a normal condition. I have not turned on changelogs on the MDS nor do I have any thing set up to automatically start any other robinhood processes. This is a snip of the output log:
2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | ======== FS scan statistics ========= 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | current scan interval = 18.0h 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | scan is running: 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | started at : 2017/10/12 08:02:18 (3.5d ago) 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | last action: 2017/10/14 04:21:35 (1.6d ago) 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | progress : 688923619 entries scanned (1466 errors) 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | inst. speed (potential): 5951.14 entries/sec (2.69 ms/entry/thread) 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | avg. speed (effective): 2308.18 entries/sec (4.63 ms/entry/thread) 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | ==== EntryProcessor Pipeline Stats === 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | Idle threads: 32 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | Id constraints count: 0 (hash min=0/max=0/avg=0.0) 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | Name constraints count: 0 (hash min=0/max=0/avg=0.0) 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | Stage | Wait | Curr | Done | Total | ms/op | 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | 0: GET_FID | 0 | 0 | 0 | 0 | 0.00 | 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | 1: GET_INFO_DB | 0 | 0 | 0 | 0 | 0.00 | 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | 2: GET_INFO_FS | 0 | 0 | 0 | 0 | 0.00 | 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | 3: PRE_APPLY | 0 | 0 | 0 | 0 | 0.00 | 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | 4: DB_APPLY | 0 | 0 | 0 | 0 | 0.00 | 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | 5: CHGLOG_CLR | 0 | 0 | 0 | 0 | 0.00 | 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | 6: RM_OLD_ENTRIES | 0 | 0 | 0 | 0 | 0.00 | 2017/10/15 18:56:49 robinhood@rbh-server[94556/3] STATS | DB ops: get=8/ins=688883643/upd=38410/rm=0 As I mentioned, this is the first scan of the file system: [root@rbh-server robinhood.d]# time robinhood -f gscratch --scan --once -L /var/tmp/gscratch.scan.12-fs-threads Using config file '/etc/robinhood.d/gscratch.conf’. Any feedback would be greatly appreciated. Thanks, Joe Mervini Sandia National Laboratories ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ robinhood-support mailing list robinhood-support@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/robinhood-support
