Revin din nou, in spiritul celor relatate ieri de Alex.
Dupa make buildworld si installworld, urmate de configurarea kernel-ului 
(buildkernel si installkernel) am probleme de stabilitate. In acest 
sens, computer-ul rebooteaza at will, cand vrea muschii lui :-( .

Iata output-ul:

Sep 11 12:13:41 Barney /kernel:
Sep 11 12:13:41 Barney /kernel:
Sep 11 12:13:41 Barney /kernel: Fatal trap 12: page fault while in 
kernel mode
Sep 11 12:13:41 Barney /kernel: fault virtual address    = 0x1100
Sep 11 12:13:41 Barney /kernel: fault code        = supervisor read, 
page not present
Sep 11 12:13:41 Barney /kernel: instruction pointer    = 0x8:0xc1b1da14
Sep 11 12:13:41 Barney /kernel: stack pointer            = 0x10:0xc0479474
Sep 11 12:13:41 Barney /kernel: frame pointer            = 0x10:0xc047948c
Sep 11 12:13:41 Barney /kernel: code segment        = base 0x0, limit 
0xfffff, type 0x1b
Sep 11 12:13:41 Barney /kernel: = DPL 0, pres 1, def32 1, gran 1
Sep 11 12:13:41 Barney /kernel: processor eflags    = interrupt enabled, 
resume, IOPL = 0
Sep 11 12:13:41 Barney /kernel: current process        = Idle
Sep 11 12:13:41 Barney /kernel: interrupt mask        =
Sep 11 12:13:41 Barney /kernel: trap number        = 12
Sep 11 12:13:41 Barney /kernel: panic: page fault
Sep 11 12:13:41 Barney /kernel:
Sep 11 12:13:41 Barney /kernel: syncing disks...
Sep 11 12:13:41 Barney /kernel:
Sep 11 12:13:41 Barney /kernel: Fatal trap 12: page fault while in 
kernel mode
Sep 11 12:13:41 Barney /kernel: fault virtual address    = 0x30
Sep 11 12:13:41 Barney /kernel: fault code        = supervisor read, 
page not present
Sep 11 12:13:41 Barney /kernel: instruction pointer    = 0x8:0xc03476ac
Sep 11 12:13:41 Barney /kernel: stack pointer            = 0x10:0xc04792a0
Sep 11 12:13:41 Barney /kernel: frame pointer            = 0x10:0xc04792a8
Sep 11 12:13:41 Barney /kernel: code segment        = base 0x0, limit 
0xfffff, type 0x1b
Sep 11 12:13:41 Barney /kernel: = DPL 0, pres 1, def32 1, gran 1
Sep 11 12:13:41 Barney /kernel: processor eflags    = interrupt enabled, 
resume, IOPL = 0
Sep 11 12:13:41 Barney /kernel: current process        = Idle
Sep 11 12:13:41 Barney /kernel: interrupt mask        = bio
Sep 11 12:13:41 Barney /kernel: trap number        = 12
Sep 11 12:13:41 Barney /kernel: panic: page fault
Sep 11 12:13:41 Barney /kernel: Uptime: 1h47m5s
Sep 11 12:13:42 Barney /kernel: Automatic reboot in 15 seconds - press a 
key on the console to abort
Sep 11 12:13:42 Barney /kernel: --> Press a key on the console to reboot,
Sep 11 12:13:42 Barney /kernel: --> or switch off the system now.
Sep 11 12:13:42 Barney /kernel: Rebooting...


Nu imi dau seama care este cauza.

O zi buna tuturor!

Bogdan Mihalcea
INFLPR -Bucuresti


__________________________________________________________
Send 'unsubscribe rofug' to [EMAIL PROTECTED] to unsubscribe

Raspunde prin e-mail lui