solutia nu imi apartine, sper sa mearga si la tine:
> I have a problem with the mouse in x-window on my fresh-installed 4.6 release > box. > > initially I have installed wmaker and all went okay, except for the mouse > which started to click and move by itself ... just like a mouse with the > wrong drivers on a winblows machine :-) > > so I switched to enlightenment - and same problem ... > > the mouse is ps2 > > and the error I get sometimes when I Ctr-Alt-Backspace to kill x-window is > > (EE)Mouse1: Write to mouse failed. > > > and in the console the mouse works ok .... that's what I dont understand .. > I had the same problem so I disabled the console mouse in rc.conf and used /dev/psm0 instead of /dev/sysmouse in XF86config. You could give that a try! HTH, petre On Wednesday 16 October 2002 15:51 Anno Domini, Constantin Teodorescu wrote using one of his keyboards: > Dar foarte mica ... > > am instalat FreeBSD 4.7 pe un Pentium II-450 MHz, 128 Mb RAM, calc. SIEMENS > > Totul a fost OK! > Ca de obicei m-am chinuit de mi-au iesit ochii ca la melc pina am facut > sa mearga placa video. Acum merge perfect. > Am avut o mica problema cu mausul care este PS/2 > Cum se incarca X-ul, cum miscai mausu, cum fugea sageata in coltul > dreapta sus si raminea acolo > > In /etc/X11/XF86Config am gasit acolo la maus, protocol "PS/2" , am pus > "Auto" si acum merge aproape perfect. > Aproape perfect zic pentru ca sistemul are un mic delay (100ms sa zic) > la click buton. > Daca faci click pe titlul ferestrei si vrei sa tirasti fereastra, nu merge. > Trebuie sa faci click, sa astepti putin (foarte putin) si pe urma sa > incepi sa deplasezi mausu. > Si cind apas pe butoane se vede evident. Fac click si butonul coboara un > picut dupa aceea. > Neesential, dar a dracului de enervant. > Am incercat cu xf86cfg alte variante, blocheaza mausu. > > E vreo inginerie pe care tre' s-o fac pe undeva sau mai bine imi trag un > maus pe seriala? > > Cu multumiri anticipate, > Teo > > > __________________________________________________________ > Send 'unsubscribe rofug' to [EMAIL PROTECTED] to unsubscribe -- 20:08:07 up 35 min, 1 user, load average: 0.18, 0.17, 0.11 __________________________________________________________ Send 'unsubscribe rofug' to [EMAIL PROTECTED] to unsubscribe
