Am un server de fisiere care se comporta groaznic cand incerc sa transfer ceva
pe retea, in jur de 2MB/s. Pe retea inseamna catre alt calculator sau chiar
catre 127.0.0.1, rezultatul e acelasi.
problema nu pare a fi din hdd
atacontrol zice:
Master = UDMA33
Slave = BIOSPIO
grep ata /var/run/dmesg.boot zice:
atapci0: <Intel PIIX4 UDMA33 controller> port
0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ad0: 76351MB <SAMSUNG SP0812N/TK100-24> [155127/16/63] at ata0-master UDMA33
bonnie zice:
-------Sequential Output-------- ---Sequential Input-- --Random--
-Per Char- --Block--- -Rewrite-- -Per Char- --Block--- --Seeks---
MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU /sec %CPU
100 16042 68.3 17318 19.8 4788 5.6 13911 57.2 20360 12.9 160.6 2.3
scp 127.0.0.1:fisier_test_test blabla zice:
2.4MB/s
sistemul este
CPU: Intel Pentium III (551.25-MHz 686-class CPU)
real memory = 134217728 (128 MB)
uname -r
5.3-RELEASE-p5
Daca imi aduc aminte acelasi server cu catva timp in urma suporta transferuri
catre alta masina de cca. 8MB/s. O fi vreo problema cu versiunea asta?
Thx.
--
Serghei.
__________________________________________________________
Send 'unsubscribe rofug' to [EMAIL PROTECTED] to unsubscribe
