https://git.reactos.org/?p=reactos.git;a=commitdiff;h=4a66cbb224804317cb4bea32c10838f43a820a70
commit 4a66cbb224804317cb4bea32c10838f43a820a70 Author: Eric Kohl <[email protected]> AuthorDate: Sun Jun 19 08:28:53 2022 +0200 Commit: Eric Kohl <[email protected]> CommitDate: Sun Jun 19 08:28:53 2022 +0200 [DISKPART] Add help text for the FORMAT command --- base/system/diskpart/diskpart_msg.mc | 667 ++++++++++++++++++++++++++++++++++- 1 file changed, 648 insertions(+), 19 deletions(-) diff --git a/base/system/diskpart/diskpart_msg.mc b/base/system/diskpart/diskpart_msg.mc index 07c71702791..45282e2de7d 100644 --- a/base/system/diskpart/diskpart_msg.mc +++ b/base/system/diskpart/diskpart_msg.mc @@ -3723,34 +3723,663 @@ SymbolicName=MSG_COMMAND_FORMAT Severity=Informational Facility=System Language=English -<Add FORMAT command help text here> + Formats the specified volume for use with ReactOS. + +Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">] + [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT] + [NOERR] + + FS=<FS> Specifies the type of file system. If no file system is given, + the default file system displayed by the FILESYSTEMS command is + used. + + REVISION=<X.XX> + + Specifies the file system revision (if applicable). + + RECOMMENDED If specified, use the recommended file system and revision + instead of the default if a recommendation exists. The + recommended file system (if one exists) is displayed by the + FILESYSTEMS command. + + LABEL=<"label"> + + Specifies the volume label. + + UNIT=<N> Overrides the default allocation unit size. Default settings + are strongly recommended for general use. The default + allocation unit size for a particular file system is displayed + by the FILESYSTEMS command. + + NTFS compression is not supported for allocation unit sizes + above 4096. + + QUICK Performs a quick format. + + COMPRESS NTFS only: Files created on the new volume will be compressed + by default. + + OVERRIDE Forces the file system to dismount first if necessary. All + opened handles to the volume would no longer be valid. + + DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or + higher. + This flag instructs the format operation to duplicate the file + system meta-data to a second set of sectors on the disk. The + duplicate meta-data is used by applications, for example repair + or recovery applications. If the primary meta-data sectors are + found to be corrupted, the file system meta-data will be read + from the duplicate sectors. + + NOWAIT Forces the command to return immediately while the format + process is still in progress. If NOWAIT is not specified, + DiskPart will display format progress in percentage. + + NOERR For scripting only. When an error is encountered, DiskPart + continues to process commands as if the error did not occur. + Without the NOERR parameter, an error causes DiskPart to exit + with an error code. + + A volume must be selected for this operation to succeed. + +Examples: + + FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS + FORMAT RECOMMENDED OVERRIDE . Language=German -<Add FORMAT command help text here> + Formatiert das angegebene Volume für die Verwendung mit ReactOS. + +Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">] + [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT] + [NOERR] + + FS=<FS> Gibt den Typ des Dateisystems an. Falls kein Dateisystem + angegeben wurde, wird das durch den Befehl + "FILESYSTEMS" angezeigte Standarddateisystem + verwendet. + + REVISION=<X.XX> + + Gibt die Dateisystemversion an (sofern zutreffend). + + RECOMMENDED Sofern angegeben, werden anstelle der Standardein- + stellung das empfohlene Dateisystem und die Version verwendet, + falls eine Empfehlung vorhanden ist. Das empfohlene Dateisystem + (sofern vorhanden) wird durch den Befehl "FILESYSTEMS" + angezeigt. + + LABEL=<"label"> + Gibt die Volumebezeichnung an. + + UNIT=<N> Überschreibt die standardmäßige Größe der + Zuteilungseinheit. Für die allgemeine Verwendung + werden dringend die Standardeinstellungen + empfohlen. + Die standardmäßige Größe der Zuteilungseinheit + für ein bestimmtes Dateisystem wird durch den + Befehl "FILESYSTEMS" angezeigt. + + NTFS-Komprimierung wird für Zuteilungseinheitsgrößen + über 4096 nicht unterstützt. + + QUICK Führt eine Schnellformatierung aus. + + COMPRESS nur NTFS: Auf dem neuen Volume erstellte Dateien + werden standardmäßig komprimiert. + + OVERRIDE Erzwingt ggf. die Aufhebung der Bereitstellung des + Dateisystems als ersten Schritt. Alle geöffneten Handles für + das Volume besäßen keine Gültigkeit mehr. + + DUPLICATE nur UDF: Dieses Kennzeichen gilt für das UDF-Format, + Version 2.5 oder höher. Durch dieses Kennzeichen wird der + Formatvorgang angewiesen, die Dateisystem-Metadaten + auf einem zweiten Sektorensatz auf dem Datenträger zu + duplizieren. Die duplizierten Metadaten werden von + Anwendungen verwendet, beispielsweise für Reparatur- + oder Wiederherstellungsanwendungen. + Wird festgestellt, dass primäre Metadatensektoren beschädigt + sind, werden die Dateisystem-Metadaten aus den doppelten + Sektoren gelesen. + + NOWAIT Erzwingt die sofortige Rückgabe des Befehls, während der + Formatierungsprozess noch stattfindet. Falls "NOWAIT" nicht + angegeben wurde, wird der Fortschritt des Formatierungs- + vorgangs von DiskPart in Prozent angezeigt. + + NOERR Nur für Skripting. Wird ein Fehler festgestellt, werden + Befehle weiterhin so verarbeitet, als wäre der Fehler + nicht aufgetreten. Ohne den Parameter "NOERR" + wird DiskPart aufgrund eines Fehlers mit einem + Fehlercode beendet. + + Damit dieser Vorgang erfolgreich ist, muss ein Volume ausgewählt werden. + +Beispiele: + + FORMAT FS=NTFS LABEL="Neues Volume" QUICK COMPRESS + FORMAT RECOMMENDED OVERRIDE . Language=Polish -<Add FORMAT command help text here> + Formats the specified volume for use with ReactOS. + +Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">] + [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT] + [NOERR] + + FS=<FS> Specifies the type of file system. If no file system is given, + the default file system displayed by the FILESYSTEMS command is + used. + + REVISION=<X.XX> + + Specifies the file system revision (if applicable). + + RECOMMENDED If specified, use the recommended file system and revision + instead of the default if a recommendation exists. The + recommended file system (if one exists) is displayed by the + FILESYSTEMS command. + + LABEL=<"label"> + + Specifies the volume label. + + UNIT=<N> Overrides the default allocation unit size. Default settings + are strongly recommended for general use. The default + allocation unit size for a particular file system is displayed + by the FILESYSTEMS command. + + NTFS compression is not supported for allocation unit sizes + above 4096. + + QUICK Performs a quick format. + + COMPRESS NTFS only: Files created on the new volume will be compressed + by default. + + OVERRIDE Forces the file system to dismount first if necessary. All + opened handles to the volume would no longer be valid. + + DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or + higher. + This flag instructs the format operation to duplicate the file + system meta-data to a second set of sectors on the disk. The + duplicate meta-data is used by applications, for example repair + or recovery applications. If the primary meta-data sectors are + found to be corrupted, the file system meta-data will be read + from the duplicate sectors. + + NOWAIT Forces the command to return immediately while the format + process is still in progress. If NOWAIT is not specified, + DiskPart will display format progress in percentage. + + NOERR For scripting only. When an error is encountered, DiskPart + continues to process commands as if the error did not occur. + Without the NOERR parameter, an error causes DiskPart to exit + with an error code. + + A volume must be selected for this operation to succeed. + +Examples: + + FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS + FORMAT RECOMMENDED OVERRIDE . Language=Portugese -<Add FORMAT command help text here> + Formats the specified volume for use with ReactOS. + +Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">] + [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT] + [NOERR] + + FS=<FS> Specifies the type of file system. If no file system is given, + the default file system displayed by the FILESYSTEMS command is + used. + + REVISION=<X.XX> + + Specifies the file system revision (if applicable). + + RECOMMENDED If specified, use the recommended file system and revision + instead of the default if a recommendation exists. The + recommended file system (if one exists) is displayed by the + FILESYSTEMS command. + + LABEL=<"label"> + + Specifies the volume label. + + UNIT=<N> Overrides the default allocation unit size. Default settings + are strongly recommended for general use. The default + allocation unit size for a particular file system is displayed + by the FILESYSTEMS command. + + NTFS compression is not supported for allocation unit sizes + above 4096. + + QUICK Performs a quick format. + + COMPRESS NTFS only: Files created on the new volume will be compressed + by default. + + OVERRIDE Forces the file system to dismount first if necessary. All + opened handles to the volume would no longer be valid. + + DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or + higher. + This flag instructs the format operation to duplicate the file + system meta-data to a second set of sectors on the disk. The + duplicate meta-data is used by applications, for example repair + or recovery applications. If the primary meta-data sectors are + found to be corrupted, the file system meta-data will be read + from the duplicate sectors. + + NOWAIT Forces the command to return immediately while the format + process is still in progress. If NOWAIT is not specified, + DiskPart will display format progress in percentage. + + NOERR For scripting only. When an error is encountered, DiskPart + continues to process commands as if the error did not occur. + Without the NOERR parameter, an error causes DiskPart to exit + with an error code. + + A volume must be selected for this operation to succeed. + +Examples: + + FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS + FORMAT RECOMMENDED OVERRIDE . Language=Romanian -<Add FORMAT command help text here> + Formats the specified volume for use with ReactOS. + +Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">] + [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT] + [NOERR] + + FS=<FS> Specifies the type of file system. If no file system is given, + the default file system displayed by the FILESYSTEMS command is + used. + + REVISION=<X.XX> + + Specifies the file system revision (if applicable). + + RECOMMENDED If specified, use the recommended file system and revision + instead of the default if a recommendation exists. The + recommended file system (if one exists) is displayed by the + FILESYSTEMS command. + + LABEL=<"label"> + + Specifies the volume label. + + UNIT=<N> Overrides the default allocation unit size. Default settings + are strongly recommended for general use. The default + allocation unit size for a particular file system is displayed + by the FILESYSTEMS command. + + NTFS compression is not supported for allocation unit sizes + above 4096. + + QUICK Performs a quick format. + + COMPRESS NTFS only: Files created on the new volume will be compressed + by default. + + OVERRIDE Forces the file system to dismount first if necessary. All + opened handles to the volume would no longer be valid. + + DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or + higher. + This flag instructs the format operation to duplicate the file + system meta-data to a second set of sectors on the disk. The + duplicate meta-data is used by applications, for example repair + or recovery applications. If the primary meta-data sectors are + found to be corrupted, the file system meta-data will be read + from the duplicate sectors. + + NOWAIT Forces the command to return immediately while the format + process is still in progress. If NOWAIT is not specified, + DiskPart will display format progress in percentage. + + NOERR For scripting only. When an error is encountered, DiskPart + continues to process commands as if the error did not occur. + Without the NOERR parameter, an error causes DiskPart to exit + with an error code. + + A volume must be selected for this operation to succeed. + +Examples: + + FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS + FORMAT RECOMMENDED OVERRIDE . Language=Russian -<Add FORMAT command help text here> + Formats the specified volume for use with ReactOS. + +Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">] + [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT] + [NOERR] + + FS=<FS> Specifies the type of file system. If no file system is given, + the default file system displayed by the FILESYSTEMS command is + used. + + REVISION=<X.XX> + + Specifies the file system revision (if applicable). + + RECOMMENDED If specified, use the recommended file system and revision + instead of the default if a recommendation exists. The + recommended file system (if one exists) is displayed by the + FILESYSTEMS command. + + LABEL=<"label"> + + Specifies the volume label. + + UNIT=<N> Overrides the default allocation unit size. Default settings + are strongly recommended for general use. The default + allocation unit size for a particular file system is displayed + by the FILESYSTEMS command. + + NTFS compression is not supported for allocation unit sizes + above 4096. + + QUICK Performs a quick format. + + COMPRESS NTFS only: Files created on the new volume will be compressed + by default. + + OVERRIDE Forces the file system to dismount first if necessary. All + opened handles to the volume would no longer be valid. + + DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or + higher. + This flag instructs the format operation to duplicate the file + system meta-data to a second set of sectors on the disk. The + duplicate meta-data is used by applications, for example repair + or recovery applications. If the primary meta-data sectors are + found to be corrupted, the file system meta-data will be read + from the duplicate sectors. + + NOWAIT Forces the command to return immediately while the format + process is still in progress. If NOWAIT is not specified, + DiskPart will display format progress in percentage. + + NOERR For scripting only. When an error is encountered, DiskPart + continues to process commands as if the error did not occur. + Without the NOERR parameter, an error causes DiskPart to exit + with an error code. + + A volume must be selected for this operation to succeed. + +Examples: + + FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS + FORMAT RECOMMENDED OVERRIDE . Language=Albanian -<Add FORMAT command help text here> + Formats the specified volume for use with ReactOS. + +Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">] + [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT] + [NOERR] + + FS=<FS> Specifies the type of file system. If no file system is given, + the default file system displayed by the FILESYSTEMS command is + used. + + REVISION=<X.XX> + + Specifies the file system revision (if applicable). + + RECOMMENDED If specified, use the recommended file system and revision + instead of the default if a recommendation exists. The + recommended file system (if one exists) is displayed by the + FILESYSTEMS command. + + LABEL=<"label"> + + Specifies the volume label. + + UNIT=<N> Overrides the default allocation unit size. Default settings + are strongly recommended for general use. The default + allocation unit size for a particular file system is displayed + by the FILESYSTEMS command. + + NTFS compression is not supported for allocation unit sizes + above 4096. + + QUICK Performs a quick format. + + COMPRESS NTFS only: Files created on the new volume will be compressed + by default. + + OVERRIDE Forces the file system to dismount first if necessary. All + opened handles to the volume would no longer be valid. + + DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or + higher. + This flag instructs the format operation to duplicate the file + system meta-data to a second set of sectors on the disk. The + duplicate meta-data is used by applications, for example repair + or recovery applications. If the primary meta-data sectors are + found to be corrupted, the file system meta-data will be read + from the duplicate sectors. + + NOWAIT Forces the command to return immediately while the format + process is still in progress. If NOWAIT is not specified, + DiskPart will display format progress in percentage. + + NOERR For scripting only. When an error is encountered, DiskPart + continues to process commands as if the error did not occur. + Without the NOERR parameter, an error causes DiskPart to exit + with an error code. + + A volume must be selected for this operation to succeed. + +Examples: + + FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS + FORMAT RECOMMENDED OVERRIDE . Language=Turkish -<Add FORMAT command help text here> + Formats the specified volume for use with ReactOS. + +Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">] + [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT] + [NOERR] + + FS=<FS> Specifies the type of file system. If no file system is given, + the default file system displayed by the FILESYSTEMS command is + used. + + REVISION=<X.XX> + + Specifies the file system revision (if applicable). + + RECOMMENDED If specified, use the recommended file system and revision + instead of the default if a recommendation exists. The + recommended file system (if one exists) is displayed by the + FILESYSTEMS command. + + LABEL=<"label"> + + Specifies the volume label. + + UNIT=<N> Overrides the default allocation unit size. Default settings + are strongly recommended for general use. The default + allocation unit size for a particular file system is displayed + by the FILESYSTEMS command. + + NTFS compression is not supported for allocation unit sizes + above 4096. + + QUICK Performs a quick format. + + COMPRESS NTFS only: Files created on the new volume will be compressed + by default. + + OVERRIDE Forces the file system to dismount first if necessary. All + opened handles to the volume would no longer be valid. + + DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or + higher. + This flag instructs the format operation to duplicate the file + system meta-data to a second set of sectors on the disk. The + duplicate meta-data is used by applications, for example repair + or recovery applications. If the primary meta-data sectors are + found to be corrupted, the file system meta-data will be read + from the duplicate sectors. + + NOWAIT Forces the command to return immediately while the format + process is still in progress. If NOWAIT is not specified, + DiskPart will display format progress in percentage. + + NOERR For scripting only. When an error is encountered, DiskPart + continues to process commands as if the error did not occur. + Without the NOERR parameter, an error causes DiskPart to exit + with an error code. + + A volume must be selected for this operation to succeed. + +Examples: + + FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS + FORMAT RECOMMENDED OVERRIDE . Language=Chinese -<Add FORMAT command help text here> + Formats the specified volume for use with ReactOS. + +Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">] + [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT] + [NOERR] + + FS=<FS> Specifies the type of file system. If no file system is given, + the default file system displayed by the FILESYSTEMS command is + used. + + REVISION=<X.XX> + + Specifies the file system revision (if applicable). + + RECOMMENDED If specified, use the recommended file system and revision + instead of the default if a recommendation exists. The + recommended file system (if one exists) is displayed by the + FILESYSTEMS command. + + LABEL=<"label"> + + Specifies the volume label. + + UNIT=<N> Overrides the default allocation unit size. Default settings + are strongly recommended for general use. The default + allocation unit size for a particular file system is displayed + by the FILESYSTEMS command. + + NTFS compression is not supported for allocation unit sizes + above 4096. + + QUICK Performs a quick format. + + COMPRESS NTFS only: Files created on the new volume will be compressed + by default. + + OVERRIDE Forces the file system to dismount first if necessary. All + opened handles to the volume would no longer be valid. + + DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or + higher. + This flag instructs the format operation to duplicate the file + system meta-data to a second set of sectors on the disk. The + duplicate meta-data is used by applications, for example repair + or recovery applications. If the primary meta-data sectors are + found to be corrupted, the file system meta-data will be read + from the duplicate sectors. + + NOWAIT Forces the command to return immediately while the format + process is still in progress. If NOWAIT is not specified, + DiskPart will display format progress in percentage. + + NOERR For scripting only. When an error is encountered, DiskPart + continues to process commands as if the error did not occur. + Without the NOERR parameter, an error causes DiskPart to exit + with an error code. + + A volume must be selected for this operation to succeed. + +Examples: + + FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS + FORMAT RECOMMENDED OVERRIDE . Language=Taiwanese -<Add FORMAT command help text here> + Formats the specified volume for use with ReactOS. + +Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">] + [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT] + [NOERR] + + FS=<FS> Specifies the type of file system. If no file system is given, + the default file system displayed by the FILESYSTEMS command is + used. + + REVISION=<X.XX> + + Specifies the file system revision (if applicable). + + RECOMMENDED If specified, use the recommended file system and revision + instead of the default if a recommendation exists. The + recommended file system (if one exists) is displayed by the + FILESYSTEMS command. + + LABEL=<"label"> + + Specifies the volume label. + + UNIT=<N> Overrides the default allocation unit size. Default settings + are strongly recommended for general use. The default + allocation unit size for a particular file system is displayed + by the FILESYSTEMS command. + + NTFS compression is not supported for allocation unit sizes + above 4096. + + QUICK Performs a quick format. + + COMPRESS NTFS only: Files created on the new volume will be compressed + by default. + + OVERRIDE Forces the file system to dismount first if necessary. All + opened handles to the volume would no longer be valid. + + DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or + higher. + This flag instructs the format operation to duplicate the file + system meta-data to a second set of sectors on the disk. The + duplicate meta-data is used by applications, for example repair + or recovery applications. If the primary meta-data sectors are + found to be corrupted, the file system meta-data will be read + from the duplicate sectors. + + NOWAIT Forces the command to return immediately while the format + process is still in progress. If NOWAIT is not specified, + DiskPart will display format progress in percentage. + + NOERR For scripting only. When an error is encountered, DiskPart + continues to process commands as if the error did not occur. + Without the NOERR parameter, an error causes DiskPart to exit + with an error code. + + A volume must be selected for this operation to succeed. + +Examples: + + FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS + FORMAT RECOMMENDED OVERRIDE . @@ -4005,7 +4634,7 @@ Syntax: INACTIVE Your computer might not start without an active partition. Do not mark a system or boot partition as inactive unless you are an experienced - user with a thorough understanding of Windows storage management. + user with a thorough understanding of ReactOS storage management. Example: @@ -4054,7 +4683,7 @@ Syntax: INACTIVE Your computer might not start without an active partition. Do not mark a system or boot partition as inactive unless you are an experienced - user with a thorough understanding of Windows storage management. + user with a thorough understanding of ReactOS storage management. Example: @@ -4077,7 +4706,7 @@ Syntax: INACTIVE Your computer might not start without an active partition. Do not mark a system or boot partition as inactive unless you are an experienced - user with a thorough understanding of Windows storage management. + user with a thorough understanding of ReactOS storage management. Example: @@ -4100,7 +4729,7 @@ Syntax: INACTIVE Your computer might not start without an active partition. Do not mark a system or boot partition as inactive unless you are an experienced - user with a thorough understanding of Windows storage management. + user with a thorough understanding of ReactOS storage management. Example: @@ -4123,7 +4752,7 @@ Syntax: INACTIVE Your computer might not start without an active partition. Do not mark a system or boot partition as inactive unless you are an experienced - user with a thorough understanding of Windows storage management. + user with a thorough understanding of ReactOS storage management. Example: @@ -4146,7 +4775,7 @@ Syntax: INACTIVE Your computer might not start without an active partition. Do not mark a system or boot partition as inactive unless you are an experienced - user with a thorough understanding of Windows storage management. + user with a thorough understanding of ReactOS storage management. Example: @@ -4169,7 +4798,7 @@ Syntax: INACTIVE Your computer might not start without an active partition. Do not mark a system or boot partition as inactive unless you are an experienced - user with a thorough understanding of Windows storage management. + user with a thorough understanding of ReactOS storage management. Example: @@ -4192,7 +4821,7 @@ Syntax: INACTIVE Your computer might not start without an active partition. Do not mark a system or boot partition as inactive unless you are an experienced - user with a thorough understanding of Windows storage management. + user with a thorough understanding of ReactOS storage management. Example: @@ -4215,7 +4844,7 @@ Syntax: INACTIVE Your computer might not start without an active partition. Do not mark a system or boot partition as inactive unless you are an experienced - user with a thorough understanding of Windows storage management. + user with a thorough understanding of ReactOS storage management. Example:
