Not really important , just a 'cosmetic' mismatch with the sound nr you select , and the sound nr shown on the midi-device.
________________________________ Van: Ted Felix <[email protected]> Verzonden: zondag 24 mei 2026 16:52 Aan: [email protected] <[email protected]> Onderwerp: Re: [Rosegarden-user] Can the instrument nr under instrument parameters be changed to start from 0 On 5/23/26 5:26 PM, eddy mulder wrote: > I have a instrument defined with multiple banks .. > Each bank has 100 registrations... > So bank 1 is 100-199 , In the instrument definition you can click on the > nr , and then numbering starts with 0 which is then logical if you want > to select sound 100 (so bank 1 intrument 00). > When back at the sequencer windows and select the newly defined > instrument and look at the instrument parameters .the 1st program nr is > then 1 can this be changed the numbering starts with 0 ? Rosegarden does not offer such a feature, and I can see that this ends up being confusing. The convention in MIDI is that Program Change #1 (to the user) is actually Program Change #0 to the hardware. If the program number is really important, include it in the name. It will look odd, but at least it will clear up the confusion. Ted. _______________________________________________ Rosegarden-user mailing list [email protected] - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
_______________________________________________ Rosegarden-user mailing list [email protected] - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
