Thanks for the suggestion. I fixed the entry and exits of the motorway and made all as motorway_link. I also changed the service lane from motorway_link to secondary so that gosmore counts it slower. I rebuild my ubuntu gosmore and ran it for the same route and still it took entry from the second entrance and did not use the first entrance.
My changes are not uploaded yet cause i'm experimenting (anyway, yournavigation takes long to rebuild) Please suggest or point me to an existing motorway road so I can learn from that setup. Thanks, Vikas 2009/7/20 Lambertus <[email protected]> > Vincent MEURISSE wrote: > >> I wonder why is the second route using a service lane and a traffic > signal > >> to reach the point. > > Because the entry 13 is mapped as Motorway_link while the 12 is not (the > same > > mistake is repeated for a lot of entry. you should consider to check all > of > > them). > > There seems to be no traffic signal mapped along the way so there is no > slow > > down for that. > > Moreover I suspect the service to use same rules for motorway and > > motorway_link. That why the system don't care about crossing a primary. > > Besides that, Gosmore does not (yet) have penalties for traffic signals > or traffic calming etc yet. > > _______________________________________________ > Routing mailing list > [email protected] > http://lists.openstreetmap.org/listinfo/routing >
_______________________________________________ Routing mailing list [email protected] http://lists.openstreetmap.org/listinfo/routing
