Hello All This is my first message to this list, so excuse me if this has been asked before (couldn't find it in the archives though)
I am running rpcemu on a suse 10 linux (AMD, 2Ghz) machine. All went fine with the 07 version as was made available for download. Yesterday I wanted to test the network software (very nice). And I discovered that I had to get the svn version and build it. No problem. It checked out fine and also build with little problems (only problem was that my system does not know FA_ALL, I just defined it in podulerom.c and it compiles ok now). However I had two ide discs configured and it now segv's during the startup fase. When I configure only one ide discs it starts (and is 6 times faster eg around 60 MIPS) but after a random time it still segv's at the same place in ide.c (function callbackide, case 0x20 on the fseeko64) . I read in the changelog that you now have to use zidefs. Can someone tell me how to configure this? I do not have the machine at hand, it is at the club so I only do some tests once a month on the clubmeeting, I am willing to run it on another machine but this is only a 600 MHz. With kind regards Leo Smiers -- Leo Smiers !Flash 0.410.1.1 http://fam.smiers.name _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
