Op 20 jan. 2013, om 11:35 heeft george greenfield <[email protected]> het volgende geschreven:
> In message <[email protected]> > Bob Latham <[email protected]> wrote: > >> In article <[email protected]>, >> Ralph Corderoy <[email protected]> wrote: > [snip] >> >> The hard disc image (long file names) was downloaded from >> http://www.marutan.net/rpcemu/ unpacked, and placed at >> Program files\RPCEmu. >> >> Using *status, I can see that idediscs is set to 1. >> >> I have not tried to format the disc. >> >> The disc from above says it is 262,080K bytes. The disc I used a couple of >> years back is 262,081KB. I've tied both and neither work. > > You could try downloading the 1GB disk image. Based on over a year's > experience with RPCEmu on a W7/64 PC, I'd question the usefulness of > an HD4 limited to 256MB; my current !Boot is 447Mb on its own, > including ScrapDirs and MPro spools…. I would recommend to download a small HD4 and put the rest on a HostFS disc. This way communication with other machines is a lot simpler. Peter RPCEmu v0.8.9 on a Mac _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
