On 22 Aug 2013, george greenfield <[email protected]> wrote:
[snip] > 0810/520 has gone pop: on about 75% of bootups I get 'Bad opcode 14 > 41435452 at 2019FC20' Does that mean that 25% start-ups are OK? > after the RO5 label disappears but before the desktop appears. > Clicking OK terminates the boot sequence. If you've added any items to PreDesk, Tasks, Look-at or Run, I'd suggest removing them. If that fixes the problem, add back the removed items, one by one, to see which is the culprit. > That's with the recompiler; the interpreter boots ok but neither will > see the network /at all/. I have Where, but am not sure how to > install/use it. The utility Where should be copied into !Boot.Library . To call it, just type where at the star-prompt, and press return. If that doesn't yield and useful information, you could install Reporter and set it to monitor Boot. However, rather than trying to locate the problem, it might be quicker to start again, with a new installation. > So back to 089/420 for the time being.... When 0810/520 is up and running, again, I'd suggest making a backup copy of the relevant folder C:\Program files\RPCEmu , or whatever. Tony _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
