In article <[email protected]>, Peter Howkins <[email protected]> wrote: > On Mon, Feb 08, 2016 at 07:24:22PM +0000, Dave Symes wrote: > > In article <[email protected]>, > > Peter Howkins <[email protected]> wrote: > > > > [Snippy] > > > - RISC OS Select 4i2 to 6i1 (6.06 to 6.20) now boot 'out of the > > > box' due to clearing the *unplug bits in the distributed > > > cmos.ram file. If applying the upgrade to an existing install > > > you must use the provided cmos.ram file and then apply your > > > changes to cmos settings afterwards. > > > > [Snippy] > > > > I've tried upgrading an existing 6.20 install with everything from the > > new archive except (Obviously) HostFS and the 6.20 Rom. > > > > With your cmos.ram file in place it gets a little way through the boot > > process then halts and fails with "Boot failed" > > > > Sorry, no furthur info possible as it can't get past that point. > > > > If I replace your cmos.ram file with the (my) original from the 0.8.13 > > install then 0.8.14 boots perfectly okay.
> For all bug reports please attach the rpclog.txt file that's created. > Also, just to check the obvious, have you done the following > *configure filesystem hostfs > Peter That was a good catch Peter. It never crossed my mind that I'd need to do that again. ;-) Once done the beast came to life... Both 6.20 on 5.22. Thanks Dave -- Dave Triffid _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
