I'm just trying to get RRD off the ground.. The data i'm putting in is basically ping data for some wireless devices to monitor the speed of the wireless network.
STATUS TIME OUT IN dB OUT EPOCH TS GREEN 30 2001-02-13_16:30:01 2001-02-13_16:30:31 -89 982103401 GREEN 43 2001-02-13_16:33:00 2001-02-13_16:33:43 -89 982103580 Time is in seconds, and the only data I'm putting in is the time sent out, and the delta time. I've setup my RRD like this.. rrdtool create bmrg-tor1.rrd --start 982100700 -s 60 DS:tor1:GAUGE:8000:1:8000 RRA:AVERAGE:0.5:1:1440 Problem: I'm getting nan's like crazy. Thats all I get when I do a rrdtool fetch bmrg-tor1.rrd AVERAGE.. but i'm thinking its cause of the AVERAGE RRA i've setup. 982105560: nan 982105620: nan 982105680: nan 982105740: nan 982105800: nan 982105860: nan 982105920: nan 982105980: nan 982106040: nan 982106100: nan 982106160: nan On problem might be that the data isn't being put in the rrd properly, but from what I can tell it is going in ok from my logs.. Questions: Is it possible to get rrdtool fetch to just show me the RAW data (since its a gauge)? Does RRD not accept data in sequential order? ie: If i have a TS of say, 100 and 160, and i input data for 160, THEN 100, will it chuck the 100 out the window? Thanx in advance guys..! -------- Lyon Lee [EMAIL PROTECTED], 519-888-7465 x2934 BlackBerry Special Operations Research In Motion, http://www.rim.net -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
