While updating using a perl script I am getting updates that are
occasionally reporting an uptime of ~1s after the execution is supposed to
begin. This data is not being added to the rrd.
I was under the impression from either the tutorial or one of the
manuals(the refrence I cannot currently find) that rrdtool could accept a
little bit of wiggle in the update time.
Can someone please verify that, or should I just normalize my time before
doing any updates?
Output from script
/nms/clariion-rrd/clariion-rrd.pl
turning on my diagnostics produced the following output:
Measurement time: 982629601
RRDs::update
("/nms/clariion-rrd/emc1.stva.yellowbrix.com/LOGICAL_UNIT_NUMBER_9/Enclosure_2_Disk_3.rrd",
"-t",
"Prct_Idle:Prct_Busy:Blk_Written:Reads:Writes:Avg_Service_Time:Blk_Read",
"982629601:1:0:40:10:10:4:40", );
RRDs::update
("/nms/clariion-rrd/emc1.stva.yellowbrix.com/LOGICAL_UNIT_NUMBER_8/Enclosure_4_Disk_3.rrd",
"-t",
"Prct_Idle:Prct_Busy:Blk_Written:Reads:Writes:Avg_Service_Time:Blk_Read",
"982629601:0:0:327884:194:6326:8:3104", );
RRDs::update
("/nms/clariion-rrd/emc1.stva.yellowbrix.com/LOGICAL_UNIT_NUMBER_2/Enclosure_1_Disk_1.rrd",
"-t",
"Prct_Idle:Prct_Busy:Blk_Written:Reads:Writes:Avg_Service_Time:Blk_Read",
"982629601:0:0:936:24:73:7:552", );
<snip 235 more of these>
Write_Ca_flushesSPA_Write_Ca_Size
Max_RequestsPrct_Dirty_Ca_PgsSPA_Read_Ca_SizeWrite_Ca_Blk_Fl
SPA_Ca_pagesWrite_requests Blk_read
Ctlr_idle_TksHigh_WatermarkSum_Q_Len_by_Arr Prct_Idle Low_Watermark
Blk_writtenArr_to_non_zero_Q Prct_Busy Total_ReadsPrct_Ca_Pgs_Owned
Lw_flush_off Total_WritesRead_Hit_Ratio System_Date Idle_flush_on
Hard_errors Read_requests Ctlr_busy_Tks Hw_flush_on
982546200: 6.1297500000e-01 1.2800000000e+02 1.6683333333e-02
1.0983333333e+01 3.6000000000e+02 2.9342113889e+01 0.0000000000e+00
6.0024916667e+00 5.8533077778e+02 9.7282694444e+00 0.0000000000e+00
5.8139444444e-01 0.0000000000e+00 0.0000000000e+00 5.6087997222e+01
3.2245000000e-01 0.0000000000e+00 5.0852750000e+00 5.0000000000e+01
2.7777777778e-06 6.0024916667e+00 4.9969444444e-02 2.0000000000e+00
8.3333333333e-02 0.0000000000e+00 5.0852750000e+00 7.7011111111e-02
2.7777777778e-06
<snip>
982629600: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN
NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN
--
Shawn Ferry (cell)301.254.6436 (mail)[EMAIL PROTECTED]
Chief Fire Eater (work)703.548.3300 (page)[EMAIL PROTECTED]
www.yellowbrix.com (fax)703.548.9151 (efax)509.277.1489
(DSA)0x18D37997 (RSA)0xEAA9B595 (page)[EMAIL PROTECTED]
-- Binary/unsupported file stripped by Listar --
-- Err : No filename to use for decode, file stripped.
-- Type: application/pgp-signature
--
Unsubscribe mailto:[EMAIL PROTECTED]
Help mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
