Hi all, I run both "traditional" mrtg and rrdtool-backended mrtg. I do this for an umber of reasons, but that's not important. I was wondering if either way graphs the exact value, regardless of when the sample was taken in a specified time period? The reason I ask is that I need to graph thei fOperStatus of a Cisco 2620 ISDN card, and it is either 0 (up) or 1 (down). There are 23 of these things, so I want to graph the status every 5 minutest o check if any of the 23 BRI channels are up. The only way I can see tod o this is to poll the OID and get back a 0 or 1. Since I don't care if the sample is taken 3 seconds after the allotted time period, I want to make sure it puts at least a 1 in the update. Any ideas? BTW, traps are configured, but I don't want to rely soley on them.
As usual, thanks for any and all ideas, even if the idea is completely different from the scenario I just described. Paul -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
