Ok I implemented the rrdtool database on another set of files but the only problem is it is not producing a graph for the router CPU and one other interface. I get a large red box "cannot create graph" Weird because I can still pull up the old MRTG files and the graphs look great. What am I missing
Thx Josh I can never nail it on the first time. Here is the info Actually it is there two interfaces where the RRDTOOL is not creating the graphs. ### Interface 62 >> Descr: 'Serial1/2:0' | Name: 'Se1/2:0' | Ip: '192.168.104.13' | Eth: '' ### Target[192.168.100.1_62]: 62:[EMAIL PROTECTED]: SetEnv[192.168.100.1_62]: MRTG_INT_IP="192.168.104.13" MRTG_INT_DESCR="Serial1/2:0" MaxBytes[192.168.100.1_62]: 192000 Title[192.168.100.1_62]: Traffic Analysis for 62 -- Union-rtr1.union.int.picut.com PageTop[192.168.100.1_62]: <H1>Traffic Analysis for 62 -- Union-rtr1.union.int.picut.com</H1> <TABLE> <TR><TD>System:</TD> <TD>Union-rtr1.union.int.picut.com in </TD></TR> <TR><TD>Maintainer:</TD> <TD></TD></TR> <TR><TD>Description:</TD><TD>Serial1/2:0 </TD></TR> <TR><TD>ifType:</TD> <TD>ppp (23)</TD></TR> <TR><TD>ifName:</TD> <TD>Se1/2:0</TD></TR> <TR><TD>Max Speed:</TD> <TD>192.0 kBytes/s</TD></TR> <TR><TD>Measure:</TD><TD>CPU Usage</TD></TR> <TR><TD>Ip:</TD> <TD>192.168.104.13 ()</TD></TR> </TABLE> # 192.168.100.1_1-Internet BGP Router 2 CPU Target[192.168.100.1_1-InternetCPU]: 1.3.6.1.4.1.9.2.1.58.0&1.3.6.1.4.1.9.2.1.58.0:[EMAIL PROTECTED] MaxBytes[192.168.100.1_1-InternetCPU]: 100 Title[192.168.100.1_1-InternetCPU]: Union-rtr1 (CPU) Options[192.168.100.1_1-InternetCPU]: absolute, gauge, nopercent PageTop[192.168.100.1_1-InternetCPU]: <H1>Union Router CPU</H1> <TABLE> <TR><TD>Measure:</TD><TD>CPU Usage</TD></TR> </TABLE> For those of you who know my ip here is directory Check out the directory /picut/picut.cgi Any ideas would be great -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
