Ok now is my turn again for thresholds.. this time I will paste a little piece of config file. Target[UnionDC-atworkInternets1]: #Et2/0:monitor @ x.x.24.1: <mailto:#Et2/0:monitor @ x.x.24.1:> SetEnv[UnionDC-atworkInternets1]: MRTG_INT_IP="10.252.0.2" MRTG_INT_DESCR="Serial2/0" MaxBytes[UnionDC-atworkInternets1]: 193000 ThreshMinI[UnionDC-atworkInternets1]: 12000 # upper limit you don't want to be crossed for INPUT traffic ThreshMaxI[UnionDC-atworkInternets1]: 17200 # prog to run when any of the two limits is crossed ThreshProgI[UnionDC-atworkInternets1]: threshold.bat # lower limit you don't want to be crossed for OUTPUT traffic ThreshMinO[UnionDC-atworkInternets1]: 12000 # upper limit you don't want to be crossed for OUTPUT traffic ThreshMaxO[UnionDC-atworkInternets1]: 17200 # prog to run when any of the two limits is crossed ThreshProgO[UnionDC-atworkInternets1]: threshold.bat #That may be enough, but you can define a variable that can describe better the problem (optional) ThreshDesc[UnionDC-atworkInternets1]: "Alert with UnionDC-atworkInternets1" #Now you can see the .bat files Title[UnionDC-atworkInternets1]: UnionDC - @home Internet Router Serial2/0 PageTop[UnionDC-atworkInternets1]: <H1>UnionDC - @home Internet Router Serial2/0</H1> <TABLE> <TR><TD>Max Speed:</TD> <TD>193.0 kBytes/s</TD></TR> </TABLE> Now in the batch file.. as you can see I named it "threshold.bat" and it basically says Now >> threshold.txt "just trying to output to a file first" but if anyone can help me with email option instead of output Option i would greatly appreciate it Also if you are wondering I am running the batch file from c:\mrtg\bin that is where .cfg file is as well thanks josh P.S I would like to thanks JB for getting me started with thresholds
-- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
