OK now here is a really weird thing that goes on with my threshold
script in MRTG. When I put the thresholds in and then run MRTG I can no
longer pull up my .cgi file for RRDTOOL. It doesn't show at all.
Sometimes it asks me if I want to save it or open it. OH btw, I am on
win2k server.
I know a lot of people run thresholds so I would appreciate some
feedback on what people think about.
But if I comment out the threshold lines.. and then run mrtg again.. My
.cgi file appears just fine.
So just what do u guys.? Thanks.
-----Original Message-----
From: Josh Goldfarb
Sent: Friday, April 27, 2001 11:48 AM
To: rrd-users
Cc: [EMAIL PROTECTED]
Subject: [rrd-users] Re: Ok, Thresholds and mailing --just noticed
something
For the rrdusers.. I would really appreciate some help on this one
With this original message i tried to update the information and
realized with RRDTOOL with the thresholds in there it was confused and
wasn't updating them so i commented them out and that didn't work so i
had to reboot the management console box
any Ideas
thx
josh
Ok now is my turn again for thresholds.. this time I
will paste a little piece of config file.
Target[UnionDC-atworkInternets1]: #Et2/0:monitor @
x.x.24.1: <mailto:#Et2/0:monitor @ x.x.24.1:>
SetEnv[UnionDC-atworkInternets1]:
MRTG_INT_IP="10.252.0.2" MRTG_INT_DESCR="Serial2/0"
MaxBytes[UnionDC-atworkInternets1]: 193000
ThreshMinI[UnionDC-atworkInternets1]: 12000
# upper limit you don't want to be crossed for INPUT
traffic
ThreshMaxI[UnionDC-atworkInternets1]: 17200
# prog to run when any of the two limits is crossed
ThreshProgI[UnionDC-atworkInternets1]: threshold.bat
# lower limit you don't want to be crossed for OUTPUT
traffic
ThreshMinO[UnionDC-atworkInternets1]: 12000
# upper limit you don't want to be crossed for OUTPUT
traffic
ThreshMaxO[UnionDC-atworkInternets1]: 17200
# prog to run when any of the two limits is crossed
ThreshProgO[UnionDC-atworkInternets1]: threshold.bat
#That may be enough, but you can define a variable that
can describe better the problem (optional)
ThreshDesc[UnionDC-atworkInternets1]: "Alert with
UnionDC-atworkInternets1"
#Now you can see the .bat files
Title[UnionDC-atworkInternets1]: UnionDC - @home
Internet Router Serial2/0
PageTop[UnionDC-atworkInternets1]: <H1>UnionDC - @home
Internet Router Serial2/0</H1>
<TABLE>
<TR><TD>Max Speed:</TD> <TD>193.0 kBytes/s</TD></TR>
</TABLE>
Now in the batch file.. as you can see I named it
"threshold.bat" and it basically says
Now >> threshold.txt "just trying to output to a file
first" but if anyone can help me with email option instead of output
Option i would greatly appreciate it
Also if you are wondering I am running the batch file
from c:\mrtg\bin that is where .cfg file is as well
thanks
josh
P.S I would like to thanks JB for getting me started
with thresholds
--
Unsubscribe mailto:[EMAIL PROTECTED]
Help mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:[EMAIL PROTECTED]
Help mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
