Greetings. /usr/local/rrdtool-1.0.33/bin/rrdtool graph /tmp/959.2078.0001MBPS.1.png --start 988689608 --end 990561004 -h 100 \ --vertical-label "Bits per Second" \ -c MGRID#ee0000 \ -c GRID#000000 \ DEF:in=/tmp/959.2078.0001MBPS.1.rrd:in:AVERAGE \ DEF:out=/tmp/959.2078.0001MBPS.1.rrd:out:AVERAGE \
CDEF:uin=in,UN,0,in,IF \ CDEF:uout=out,UN,0,out,IF \ CDEF:fin=uin \ CDEF:fout=uout \ CDEF:pin=fin,1000000,/,1,*,1,/ \ CDEF:pout=fout,1000000,/,1,*,1,/ \ CDEF:nf=" + ninetyFifth + ",UN,0," + ninetyFifth + ",IF \ CDEF:nicenf=nf,1000000,/,1,*,1,/ \ CDEF:maxin=" + maxIn + ",UN,0," + maxIn + ",IF \ CDEF:maxout=" + maxOut + ",UN,0," + maxOut + ",IF \ CDEF:cin=" + currentIn + ",UN,0," + currentIn + ",IF \ CDEF:cout=" + currentOut + ",UN,0," + currentOut + ",IF \ AREA:fin#00cc00:"Incoming Traffic in Bits per Second" \ LINE1:fout#0000ff:"Outgoing Traffic in Bits per Second" The above works however, the portion that has spaces between it (the 6 CDEF lines) do not work. Are there ways to define on a command line different values that one would want to use in the graph...? Hope this makes sense to someone :) my brain is hurting from all the reading. Thanks in advance. -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
