I use this command to evaluate VLAN interfaces but it always give me the default cfg file from cfgmaker. It doesn't take in account the if-filter command.
Platform : w2K MRTG version : 2.9.17 RRDTool cfgmaker [EMAIL PROTECTED] '--if-filter=($default && ($if_type==53 or $if_type==136 or $if_type==138))' --output gp18.cfg Here's an example of ethernet interfaces (6 in the ifType)...It should not be appear. I don't understand !! Any help appreciated ### Interface 1 >> Descr: 'Physical port: et.2.1' | Name: 'et.2.1' | Ip: '' | Eth: '' ### Target[router_1]: 1:[EMAIL PROTECTED]: SetEnv[router_1]: MRTG_INT_IP="" MRTG_INT_DESCR="Physical port: et.2.1" MaxBytes[router_1]: 12500000 Title[router_1]: Traffic Analysis for 1 -- router PageTop[router_1]: <H1>Traffic Analysis for 1 -- router</H1> <TABLE> <TR><TD>System:</TD> <TD>router in CERN</TD></TR> <TR><TD>Description:</TD><TD>Physical port: et.2.1 </TD></TR> <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> <TR><TD>ifName:</TD> <TD>et.2.1</TD></TR> <TR><TD>Max Speed:</TD> <TD>12.5 MBytes/s</TD></TR> </TABLE> etc... -- __________________________________ BALLO Ismaël CSN until 2002/2 - CERN Office 31R-030 IT/CS Division European Org. for Nuclear Research Geneva 23 - CH 1211 Switzerland Tel + 41 22 76(75027) Fax + 41 22 76(77155) Mailbox G22810 __________________________________ -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
