Try a program as GetIF (for windows). With this program you can see if the device is responding to SNMP. If not, maybe you need to configure your device to talk snmp.
You can also try to use the complete OID number and not the text. Sometimes you need to put an '.' infront of those numbers. Grtz, JT -----Original Message----- From: spiekey [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 26, 2002 6:56 PM To: [email protected] Subject: [rrd-users] Re: SNMP - what do i do wrong? Hello! ----- Original Message ----- From: "Claude R Trepanier/Bromont" <[EMAIL PROTECTED]> To: "spiekey" <[EMAIL PROTECTED]> Cc: "rrd-users" <[email protected]> Sent: Tuesday, February 26, 2002 6:44 PM Subject: [rrd-users] Re: SNMP - what do i do wrong? > > try: $ snmpget 192.168.1.40 read_community_name system.sysDescr.0 > > Obviously you replace read_community_name with the proper name. I > think the > capital D in sysDescr is your problem. Then i get this: # snmpget 192.168.1.40 read_community_name system.sysDescr.0 Timeout: No Response from 192.168.1.40. ;( Spiekey > > Claude R Trépanier > Support de l'infrastructure du réseau > IBM Bromont > > > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Help mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/rrd-users > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
