Thank you for your help. Problem is solved by restarting the snmpdx daemon.--Anup Ray
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Gerhard Ecaroh Froehlich Sent: Monday, September 02, 2002 4:32 AM To: Anup Ray Cc: [email protected] Subject: [rrd-users] Re: problem building a particular mrtg.cfg Anup Ray wrote: > > Hi, > I am getting a problem while making mrtg.cfg file for a solaris box. > Following is the error output: > > --base: Get Device Info on [EMAIL PROTECTED]: > SNMP Error: > Received SNMP response with error code > error status: noSuchName > index 1 (OID: 1.3.6.1.2.1.1.1.0) > SNMPv1_Session (remote host: "u10-1.safe-prop.com" [10.10.1.100].161) > community: "public" > request ID: -1281356335 > PDU bufsize: 8000 bytes > timeout: 2s > retries: 5 > backoff: 1) > But when I use it for other systems (solaris) it works. I am using command > from a single system(ultra30). So same source programs are being used. Try to run the SNMP query (for instance with UCD-SNMP with "snmpwalk") from the commandline. You should see the following string. If not, snmpdx doesnot run, the firewall rules do not pass querys on Port 161, the community string is wrong, the snmpd is not configured. host:admin,94% ./snmpwalk -p 161 host public .1.3.6.1.2.1.1.1.0 system.sysDescr.0 = Sun SNMP Agent, UltraSPARC-IIi-cEngine Bye, Ecaroh -- Gerhard Ecaroh Froehlich, Systemadministrator -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
