Sorry for the mis-information. Several years ago (7?)I tried to monitor 4000 nodes with mrtg, and it did not scale...but noone suggested what you just did.
It sounds like mrtg can be set up to do the data collection and display asynchronously. Although I use mrtg for small collections, I never tried it for large collections after my experience several years ago. With respect to the daemon, is there a signal which can be sent to the daemon to tell it to reload the configuration file? We have about 13000 individual catalyst ports on our network, with only about 6400 currrently active. Each morning (actually twice a day) I model the network and build my mrtg (and other monitoring) config files so that only active switches and ports are actively monitored. I would need to be able to send a signal to the daemon telling it to read in a new config file. I am currrently running mrtg from crontabs. It sounds like I could improve the efficiency quite a bit by running it as a daemon, assuming I can send a signal to the daemon telling it reload the config file. Thanks, I appreciate the "correction"! Connie Connie Logg - Network Analyst - 650-926-2879 Stanford Linear Accelerator Center MS 97; 2575 SandHill Road; Menlo Park CA 94025 "Happiness is found along the way, not at the end of the road" -----Original Message----- From: Tobias Oetiker [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 25, 2002 1:57 PM To: Logg, Connie A. Cc: 'Augusto Castelan Carlson'; '[email protected]' Subject: Re: [rrd-users] Re: mrtg performance Today Logg, Connie A. wrote: > > You need to look for another way to do it. MRTG does not scale > well. One idea is to write scripts to collect the snmp stats and > log them to flat files. This collection can be done in less than > 5 minutes. Write an analysis script and plotting script which > run asynchronously to the data collection. Connie, I must object, of you use the fork option in mrtg the snmp data collection can be improved a lot ... further can you run mrtg as a daemon which saves the startup time which again is substantial with a large config file ... and last you can use rrdtool for logging within mrtg which will cut down logging time massively ... depending on the amount of diskcache (ram) your box has, it will be able to log between 30 and 1000 values a second ... Oh, and you are using Unix I hope... cheers tobi -- ______ __ _ /_ __/_ / / (_) Oetiker, ETZ J97, ETH, 8092 Zurich, Switzerland / // _ \/ _ \/ / phoneto:+41(0)1-632-5286 faxto:+41(0)1-632-1517 /_/ \.__/_.__/_/ [EMAIL PROTECTED] http://google.com/search?q=tobi -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
