For Win2K processor load, I am using the hrProcessorLoad entry (1.3.6.1.2.1.25.3.3.1.2.5) from .iso.org.dod.internet.mgmt.mib-2.host.hrdevice.hrProcessorTable.hrProcessorEntry.hrProcessorLoad. You need to walk 1.3.6.1.2.1.25.3.3.1.2 to figure out what the instance should be. On my boxes, it is has consistently been .5.
I have found that you need to multiply Processor Load captures by 100 to get around MRTG rounding problems. I also seem to remember reading somewhere that the snmp4w2k MIBs have a problem with multiple processors but can't remember where I saw that (and I haven't seen any problems on my multiprocessor boxes). On my Win2K boxes, 1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0 is .iso.org.dod.internet.private.enterprise.microsoft.software.systems.os.windowsNT.performance.cpuprocessorTable.cpuprocessorEntry.cpuPercentProccessorTime and holds no values when I walk it. Since I don't get any values, I can test your template to see if I can duplicate your results. Sorry if that doesn't help much. Lib Curtis At 18:53 11/12/2002, Warrick FitzGerald wrote: > > 1. Go to http://www.wtcs.org/snmp4tpc/snmp4w2k.htm and download the free > >I ended up doing exactly that. > > > 3. Here are some MRTG templates that I have used successfully to monitor > >I tried using your template, with no joy. Perhaps someone can give me a hand >and tell me what I'm doing wrong here. > >I see that you are using the 1.3.6.1.2.1.25.3.3.1.2 OID value, but I'm using >1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0 which as far as I could tell from their >site was the CPU mib that full under their segment of the MIB. Are you sure >you are not querying the W2K MIB here ? > >Also, I simply get a response from the server saying that the OID you are >specifying in your example does not exist. > >I use the following template ... and well ... it sot of works .... let me >explain why : > >--------------------------------------------- >WorkDir: /var/www/html/mrtg >Options[_]: perminute,growright,avgpeak > >Target[Web3]: >1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0&1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.0:[EMAIL >PROTECTED] >62.16.54.103: >Options[Web3]: gauge >MaxBytes[Web3]: 100 >Title[Web3]: Traffic Stats for Web3 >PageTop[Web3]: <H1>CPU Load for Web3</H1> >--------------------------------------------- > >Even though I have both values set to be exactly the same thing, somehow >MRTG plots two completly seperate numbers .... ?????? where the Green IN >seems to represent the real CPU utilsation and the blue OUT seems to be some >sort of average ..... anyone know what on earth is going on here ? > >Thanks >Warrick FitzGerald > > > > >-- >Unsubscribe mailto:[EMAIL PROTECTED] >Help mailto:[EMAIL PROTECTED] >Archive http://www.ee.ethz.ch/~slist/rrd-users >WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi ------------------------------------------------------------ This email, and any included attachments, have been checked by Norton AntiVirus Corporate Edition (Version 7.6), AVG Server Edition 6.0, and Merak Email Server Integrated Antivirus (Alwil Software's aVast! engine) and is certified Virus Free. -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
