Vijay, Thanks for your advice, but I am already aware of the script that you mentioned. As, it happens to be I have the patch that shows the total bandwidth in 14all like the one at http://mrtg.vortechhosting.com/switch1/?log=65.57.231.8_1 but I just cant seem to get it to work.
It looks like the patch is for a older verion of 14all and not the latest one out there. If someone would be willing to get this patch to work, I could send them a copy of it. Kind Regards, Imran ---------------------------------------- Hi Imran, There is no specific way to calculate the data transfer from the machines , co-located servers in your case .But there definetely a script which can be used over MRTG which calculates the traffic total from the servers and reports in a graphical format i;e daily, monthly usage. Given below is the site link and the instrcutions how to make this script running: http://www.geocities.com/josef_wendel/ In this page look for mrtg totalizer. you need to install a few GD libraries whcih can be downladed cron CPAN. Vijay ---------------------------------------- Is there any way to get the actual data transfer displayed on the RRD graphs using 14all.cgi An example of this can be found here http://mrtg.vortechhosting.com/switch1/?log=65.57.231.8_1 Any help appreciated. Thanks Imran -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
