You might look into netflow if the cisco hardware in question supports it. I
monitor the vlan destination of traffic coming into our site via extracting it
from netflow records. Of course, the success of that depends on how much
traffic you have, and how many flow records are generated.
Connie Logg, Network Analyst, [EMAIL PROTECTED], 650-926-2879
Stanford Linear Accelerator Center, MS 97, 2575 Sand Hill Road, Menlo
Park, CA 94024
"'IF' is the middle word in life" but "Happiness is found along the way, not at
the end of the road."
-----Original Message-----
From: del Prado, Rodrigo [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 05, 2003 2:10 AM
To: [email protected]
Subject: [rrd-users] VLAN Traffic monitoring
Hi all,
I want to monitor Vlans traffic on a Cisco 3660. Vlans are on interface
FastEthernet0/0 and I can see its traffic with "sh vlans" but I can´t get this
data with snmp, which oid points to these vlans? As I think vlans are on new
indexes, but the only indexes that the has are the physical interfaces. Snmp is
activated on interface FastEthernet (and all other interfaces), but I don´t
know if I have to configure someting else? The IOS version is 12.1(5)T7. Any
help would be appreciated, thanks in advance and sorry for my english.
Regards,
Rodrigo del Prado
-- Attached file removed by Ecartis and put at URL below --
-- Type: application/ms-tnef
-- Size: 3k (3666 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/3E65CCE529542-winmail.d
--
Unsubscribe mailto:[EMAIL PROTECTED]
Help mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:[EMAIL PROTECTED]
Help mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
