I ran into this strange problem that I can't seem to pin down, wondering if anybody has any ideas.
I have 2 different RRD formats: ATM-PVC: rrdtool create [fn] --start [st] --step 900 [ 7 DS's heartbeat = 2700 ] RRA:AVERAGE:0.5:1:768 RRA:AVERAGE:0.5:8:768 RRA:AVERAGE:0.5:96:400 [ plus identical MAX RRA's ] ATM-PORT: rrdtool create [fn] --start [st] --step 900 [ 74 DS's heartbeat = 2700 ] RRA:AVERAGE:0.5:1:768 RRA:AVERAGE:0.5:8:768 RRA:AVERAGE:0.5:96:400 [ plus identical MAX RRA's ] ok, so my RRAs are 8 days of 15min samples, then averaged to 2hr samples for 64 days, then averaged to 24hr for 400 days. The only config difference between the 2 is the large number of DS in the port RRDs (7 vs 74.) I've had the pvc data collecting for a couple of months, works great. I just started collecting the port data, and after the first 8 days, occasionally a one day (-1d) graph for any DS shows 2hr samples. Then later, its back to showing 15min samples. When the graph is showing 2hr samples, I've fetched the data (-1d) and every sample returned is a correct 15min interval with unique data in each sample. I've used RRD a lot, for a variety of different tools, and never been able to not find my mistake, so I've looked for the usual stupid type-o's, etc. Any suggestions would be greatly appreciated! thanks, Kathy Kathy Kessey New Edge Networks 360.906.9901 -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
