Dear All
i asked this question before but may be i was not able to explain my
wordings. So let me try again. in this config file i am monitring routers all
serial port traffic in one graph and two downlinks bandwiths graphs by adding
all of there IP's. Now i want that each interface bandwith should be shown with
diferent color. in one graph. no need to show total bandwith. i hope now you
will understand
########################################################################
WorkDir: /var/www/html/mrtg/routerall
Options[_]: growright, bits
Interval: 1
RunAsDaemon: yes
LogFormat: rrdtool
PathAdd: /usr/local/rrdtool-1.0.33/bin
LibAdd: /usr/local/rrdtool-1.0.33/lib/perl/
Target[111.111.111.1111_4]: 4:[EMAIL PROTECTED]: + 5:[EMAIL PROTECTED]: + 6:pub
[EMAIL PROTECTED]: + -2:[EMAIL PROTECTED]: + -16777220:[EMAIL PROTECTED]
:
SetEnv[111.111.111.1111_4]: MRTG_INT_IP="222.222.222.222"
MRTG_INT_DESCR="Serial2/0"
MaxBytes[111.111.111.1111_4]: 1300000
Title[111.111.111.1111_4]: Traffic Analysis for PTCL Circuits--Idream Bandwith
PageTop[111.111.111.1111_4]: <H1>Traffic Analysis for PTCL & Idream Bandwith
Circuit
s</H1>
<TABLE>
<TR><TD>System:</TD> <TD>lhr-bb-router in </TD></TR>
<TR><TD>Maintainer:</TD> <TD>Zeeshan Ahmed</TD></TR>
<TR><TD>Description:</TD><TD>All PTCL + Downlink Bandwiths</TD></TR>
<TR><TD>ifType:</TD> <TD>propPointToPointSerial (22)</TD></TR>
<TR><TD>ifName:</TD> <TD>Router's serials & Downlinks</TD></TR>
<TR><TD>Max Speed:</TD> <TD>13 Mb/s</TD></TR>
<TR><TD>Ip:</TD> <TD>PTCL 6MB, IDream 5+2</TD></TR>
#################################################################################
Regards
Zeeshan Ahmed
--
Unsubscribe mailto:[EMAIL PROTECTED]
Help mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
