That's the "last resort". We have a network management company that handles all the config's on these units not to mention that I'd have to get access to 100+ units. That could take me awhile *grin*. But if there all the same config it's just a matter of cut and paste. I just need the access. Thanks for the input!
I think it'd be a better option anyways, since I could finally have error sec, hard error sec, etc stats. David Gibbons Sr. Network Engineer Caliber Collision Centers 949-283-7593 -----Original Message----- From: Kathy Kessey [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 04, 2003 4:03 PM To: Gibbons, David Cc: '[email protected]' Subject: Re: [rrd-users] Re: SNMP Question for Bay ASN David - if you can't find it on the bay, you might look at the paradyne csu/dsu. I'm currently getting snmp stats from verilink csu/dsus - we looked paradyne and depending on the model you can get decent stats from them. Kathy Kessey New Edge Networks 360.906.9901 On Wed, 4 Jun 2003, Gibbons, David wrote: > K, I think I found it but there's no data in it so now I'm looking to see if > there are any ASN people on this list to see if there is a way to get this > information. I'm running Bay ASN 13.1os with a serial connection to a > Paradyne CSU/DSU. Dyn. Config. very simple stuff. > I found the OID in > 1.3.6.1.4.1.18.3.5.9.6.2.1 > 18 - Wellfleet > 3 - wfSwSeries7 > 5 - cfApplication > 9 - wfWanGroup > 6 - wfFrSwGroup > 2 - wfFrSwCctTable > 1 - wfFrSwCctEntry > > > Any ideas? And no I can buy 40 Cisco 2620 replacements. > > David Gibbons > Sr. Network Engineer > Caliber Collision Centers > 949-283-7593 > > > -----Original Message----- > From: Gibbons, David > Sent: Wednesday, June 04, 2003 1:57 PM > To: '[email protected]' > Subject: [rrd-users] Re: SNMP Question for Bay ASN > > > MIB walk jumps from .1.3.6.1.2.1.7 to .1.3.6.1.2.1.11 suggesting that they > created custom MIB's from the ASN. Using Wellfleet FR FR2 I was unable to > find anything that stated it was a DE counter. > David Gibbons > Sr. Network Engineer > Caliber Collision Centers > 949-283-7593 > > > -----Original Message----- > From: Kathy Kessey [mailto:[EMAIL PROTECTED] > Sent: Wednesday, June 04, 2003 11:28 AM > To: Gibbons, David > Cc: '[email protected]' > Subject: Re: [rrd-users] SNMP Question for Bay ASN > > > > David, does Bay report frCircuitTable (1.3.6.1.2.1.10.32.2) in rfc 2115? > You should be able to get Sent/Recd DE's per connection. Never used this > with Bay, though. > > Hope this helps - > > > Kathy Kessey > New Edge Networks > 360.906.9901 > > > > > On Wed, 4 Jun 2003, Gibbons, David wrote: > > > Hey all.... > > Does anyone know the SNMP OID for Discard Eligible packets in/out over > > Frame on a Bay ASN? I've been hunting for a few days now and can't seem > to > > find them. > > > > Any help? > > > > Even a "Nope never found one" would be nice. > > > > Thanks > > > > David Gibbons > > Sr. Network Engineer > > Caliber Collision Centers > > > > > > -- > > Unsubscribe mailto:[EMAIL PROTECTED] > > Help mailto:[EMAIL PROTECTED] > > Archive http://www.ee.ethz.ch/~slist/rrd-users > > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > > > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Help mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/rrd-users > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Help mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/rrd-users > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
