OK, I'm experimenting with using MRTG as the front-end, RRDTool as the back-end and 14all.cgi for my graphing. One of the goals of the migration is to drop the polling interval down to 1 minute. When I set the refresh to less than 5 minutes (300 seconds) I get an error, yet dropping the interval down to 1 minute generates no errors. That's fine, I adjust my crontab accordingly.
The thing that concerns me is the format of the database. The order I went in was: 1) Insert logformat command in MRTG config 2) Verify it still works 3) Install 14all.cgi 4) Verify it still works 5) Drop interval down to 1 minute & edit crontab 6) Verify it still works Well, it is working just fine and by that I mean it isn't generating any errors. However, I am of the understanding that the database was formed automatically with a certain number of rows for the graphs. I can only assume that that number is based off of the interval configured. Since I changed it from five minutes to one, will it be automatically adjusted or is my database now messed up? Is there a different order of steps I should've taken to ensure that the RRD accounts for a 1 minute interval, instead? Thanks in advance, -Jon Hartman -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
