Two possibilities: 1. Feed your rrds with two different sources, one with the part of the value up to 50, the other one with the part higher than 50. Then graph first source as AREA green and STACK second source red. 2. CDEF two values, Value1: If load > 50 then Value1=50, Value2=load-50. Then graph Value1 as AREA green and STACK Value2 red.
HTH, Stephan Wengrzik, Andreas wrote: >Hi List! > >I have a Graph which is drawn by one value (cpuload) >I draw an hrule greater than 50 >I select the values greater than 50 and draw them red, now i want >to draw only the part of the value red which is above the hrule ?! >Is this possible? > >Here´s my actually definition: > >DEF:as400cpu=$f:as400cpu:AVERAGE CDEF:cpu1=as400cpu,50,GT,UNKN,as400cpu,IF >CDEF:cpu2=as400cpu,50,LE,UNKN,as400cpu,IF >AREA:cpu1#82BB6C:\"Prozessorauslastung OK\" >AREA:cpu2#E24545:\"Prozessorauslastung Kritisch\" HRULE:50#D0D000:\"Warning >level\" HRULE:100#E00000:\"Kritisches Level\" LINE1:cpu1#000000 >LINE1:cpu2#000000 GPRINT:as400cpu:MAX:\"Maximale Auslastung\\: %.4lg Prozent\" >GPRINT:as400cpu:MIN:\"Minimale Auslastung\\: %.4lg Prozent\" >GPRINT:as400cpu:AVERAGE:\"Durchschnittliche Auslastung\\: %.4lg Prozent\" > > -- Stephan Harren Head of Engineering AboveNet Deutschland GmbH ------------------------- Phone +49 69 90554 153 Fax +49 69 90554 111 Cell +49 173 7011126 -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
